5
« Poslední příspěvek od mikesznovu kdy Dnes v 20:12:06 »
Ani. Na androidu se to nechytá. Nebo že by Android16 to uměl už?
Stejny scénář : usb0 místo eth0, ale ip route funguje divně, pro default/via, ale pro LAN (/24) jsem dodal.... Opèt: ani príchhozí trafficcc !
Přičemž na linuxu (arm7) žral 86mA
Logcat ppo spojení hlásí
:
Light requested not available on this device. 2
DWC3 exited from low power mode
xHCI Host Controller
new USB bus registered, assigned bus number 1 hcc params 0x0230fe65 hci version 0x110 quirks 0x00010010 irq 698, io mem 0x0a800000 New USB device found, idVendor=1d6b, idProduct=0002
New USB device strings: Mfr=3, Product=2,
SerialNumber=1 Product: xHCI Host Controller Manufacturer: Linux 4.4.249 xhci-hcd SerialNumber: xhci-hcd.0.auto 1.0:
USB hub found 1.0: 1 port detected
xHCI Host Controller new USB bus registered, assigned bus number 2
We don't know the algorithms for LPM for this host, disabling LPM. New USB device found, idVendor=1d6b, idProduct=0003
New USB device strings: Mfr=3, Product=2, SerialNumber=1 Product: xHCI Host Controller Manufacturer: Linux 4.4.249 xhci-hcd SerialNumber: xhci-hcd.0.auto 1.0: USB hub found 1.0: 1 port detected
new high-speed USB device number 2 using xhci-hcd New USB device found, idVendor=0bda, idProduct=8156
New USB device strings: Mfr=1, Product=2, SerialNumber=6 Product: USB 10/100/1G LAN
Manufacturer: Realtek SerialNumber: 401300001 interfaceLinkStateChanged, iface: usb0, up: false 2.0:
MAC-Address: 6c:1f:f8:16:o8:n0 2.0: setting rx_max = 16384 2.0: setting tx_max = 16384 2.0 usb0: register 'cdc_ncm' at usb-xhci-hcd.0.auto-1, CDC NCM, 6c:1f:f7:16:d8:40 Unparsed Class-specific uid=1000(system) UsbService host identi
(Omlouvám se za fmt, k0k∅tský termux zmastí newline ) -- tt čitelnější než code
Pravidelne:
.......
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink
2.0 usb0: network connection: connected
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink
2.0 usb0: network connection: connected
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink
2.0 usb0: network connection: connected
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink
2.0 usb0: network connection: connected
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink
2.0 usb0: network connection: connected
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink
2.0 usb0: network connection: connected
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink
2.0 usb0: network connection: connected
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink
2.0 usb0: network connection: connected
uid=1000(system) InputDispatcher identical 1 line
Light requested not available on this device. 2
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink
2.0 usb0: network connection: connected
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink
2.0 usb0: network connection: connected
2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink