Záhadné vytuhnutí serveru

[Petr]

Ahoj. Poskladal jsem masinu pro proxy server. Prvnich 24h vse ok. Nahle doslo k zatuhnuti.

-Linux mel prvne problem vubec videt hdd a install medium. Z toho duvodu se pouzil radic PCI SATA, ktery problem odstranil.
-Windows ty problemy nemel, ale ten tam urcite nechci
-Zkousel jsem menit ram a nic...

V dmesg jsem nic nenasel, ale pokud nekoho neco napadne...

Kód: [Vybrat]

[    0.544882] msgmni has been set to 1724
[    0.544980] SELinux:  Registering netfilter hooks
[    0.545155] alg: No test for stdrng (krng)
[    0.545256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.545258] io scheduler noop registered
[    0.545259] io scheduler deadline registered
[    0.545369] io scheduler cfq registered (default)
[    0.545486] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.545490] pcieport 0000:00:01.0: setting latency timer to 64
[    0.545681] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.545692] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.545852] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[    0.545859] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.546218] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.546219] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.547184] input: Power Button as /class/input/input0
[    0.547188] ACPI: Power Button [PWRB]
[    0.547260] input: Power Button as /class/input/input1
[    0.547262] ACPI: Power Button [PWRF]
[    0.547475] fan PNP0C0B:00: registered as cooling_device0
[    0.547480] ACPI: Fan [FAN0] (off)
[    0.547619] fan PNP0C0B:01: registered as cooling_device1
[    0.547623] ACPI: Fan [FAN1] (off)
[    0.547761] fan PNP0C0B:02: registered as cooling_device2
[    0.547765] ACPI: Fan [FAN2] (off)
[    0.548075] fan PNP0C0B:03: registered as cooling_device3
[    0.548080] ACPI: Fan [FAN3] (off)
[    0.548218] fan PNP0C0B:04: registered as cooling_device4
[    0.548228] ACPI: Fan [FAN4] (off)
[    0.549241] ACPI: SSDT 6babc018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.550667] Monitor-Mwait will be used to enter C-1 state
[    0.550682] Monitor-Mwait will be used to enter C-2 state
[    0.550695] Monitor-Mwait will be used to enter C-3 state
[    0.550801] processor LNXCPU:00: registered as cooling_device5
[    0.551714] ACPI: SSDT 6babda98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.552421] ACPI: SSDT 6babec18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.553561] processor LNXCPU:01: registered as cooling_device6
[    0.555115] processor LNXCPU:02: registered as cooling_device7
[    0.556640] processor LNXCPU:03: registered as cooling_device8
[    0.563510] thermal LNXTHERM:01: registered as thermal_zone0
[    0.563520] ACPI: Thermal Zone [TZ00] (28 C)
[    0.564258] thermal LNXTHERM:02: registered as thermal_zone1
[    0.564266] ACPI: Thermal Zone [TZ01] (30 C)
[    0.564315] isapnp: Scanning for PnP cards...
[    0.921759] isapnp: No Plug & Play device found
[    0.954160] Non-volatile memory driver v1.3
[    0.954163] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.954311] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.955074] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.957278] brd: module loaded
[    0.957319] Uniform Multi-Platform E-IDE driver
[    0.958475] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    0.958485] Probing IDE interface ide0...
[    0.961486] ide0: no devices on the port
[    0.961560] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    0.961577] Probing IDE interface ide1...
[    0.964578] ide1: no devices on the port
[    0.964652] ide1 at 0x170-0x177,0x376 on irq 15
[    0.964706] ide-gd driver 1.18
[    0.964937] usbcore: registered new interface driver libusual
[    0.965110] PNP: No PS/2 controller found. Probing ports directly.
[    0.965534] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.965537] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.965803] mice: PS/2 mouse device common for all mice
[    0.966629] cpuidle: using governor ladder
[    0.968062] cpuidle: using governor menu
[    0.969711] usbcore: registered new interface driver hiddev
[    0.969768] usbcore: registered new interface driver usbhid
[    0.969770] usbhid: v2.6:USB HID core driver
[    0.970074] TCP cubic registered
[    0.970075] Initializing XFRM netlink socket
[    0.970083] NET: Registered protocol family 17
[    0.970153] Using IPI No-Shortcut mode
[    0.970367] registered taskstats version 1
[    0.970847] Freeing unused kernel memory: 416k freed
[    0.972417] sata_sil 0000:05:02.0: version 2.4
[    0.972442] sata_sil 0000:05:02.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.972523] scsi0 : sata_sil
[    0.972809] scsi1 : sata_sil
[    0.972894] ata1: SATA max UDMA/100 mmio m512@0xf7d40000 tf 0xf7d40080 irq 19
[    0.972898] ata2: SATA max UDMA/100 mmio m512@0xf7d40000 tf 0xf7d400c0 irq 19
[    1.277928] ata1: SATA link down (SStatus 0 SControl 310)
[    1.582774] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    1.586217] ata2.00: ATA-8: WDC WD2500HHTZ-04N21V0, 04.06A00, max UDMA/133
[    1.586219] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.589257] ata2.00: configured for UDMA/100
[    1.589335] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500HHTZ-0 04.0 PQ: 0 ANSI: 5
[    1.591203] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.591205] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.591262] sd 1:0:0:0: [sda] Write Protect is off
[    1.591264] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.591290] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.591406] sda: detected capacity change from 0 to 250059350016
[    1.591413]  sda: sda1 sda2
[    1.597435] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.625586] kjournald starting.  Commit interval 5 seconds
[    1.625632] EXT3-fs: mounted filesystem with ordered data mode.
[    2.644304] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    3.013831] input: PC Speaker as /class/input/input2
[    3.018499] ahci 0000:00:1f.2: version 3.0
[    3.018512] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.018548] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    3.030879] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    3.030883] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[    3.030887] ahci 0000:00:1f.2: setting latency timer to 64
[    3.045496] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.045521] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.045563] r8169 0000:03:00.0: setting latency timer to 64
[    3.045570] r8169 0000:03:00.0: unknown MAC, using family default
[    3.045650] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[    3.045925] eth0: RTL8168b/8111b at 0xf7d4a000, 60:a4:4c:c9:56:67, XID 08000800 IRQ 28
[    3.056723] scsi2 : ahci
[    3.066851] scsi3 : ahci
[    3.075254] scsi4 : ahci
[    3.075446] scsi5 : ahci
[    3.088023] scsi6 : ahci
[    3.089623] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[    3.089625] Copyright (c) 1999-2006 Intel Corporation.
[    3.089658] e1000 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.090414] scsi7 : ahci
[    3.090464] ata3: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12100 irq 27
[    3.090467] ata4: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12180 irq 27
[    3.090470] ata5: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12200 irq 27
[    3.090471] ata6: DUMMY
[    3.090472] ata7: DUMMY
[    3.090473] ata8: DUMMY
[    3.356020] e1000: 0000:05:00.0: e1000_probe: (PCI:33MHz:32-bit) 90:e2:ba:37:f7:41
[    3.394659] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.394674] ata3: SATA link down (SStatus 0 SControl 300)
[    3.395027] ata4: SATA link down (SStatus 0 SControl 300)
[    3.407072] ata5.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100
[    3.420061] ata5.00: configured for UDMA/100
[    3.422009] scsi 4:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1S   9L08 PQ: 0 ANSI: 5
[    3.422176] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[    3.441403] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.441409] Uniform CD-ROM driver Revision: 3.20
[    3.441535] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    3.502982] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[    3.503011] e1000 0000:05:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.769774] e1000: 0000:05:01.0: e1000_probe: (PCI:33MHz:32-bit) 90:e2:ba:2b:af:dc
[    3.916594] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
[    4.131509] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    4.350516] EXT3 FS on sda1, internal journal
[    4.394168] kjournald starting.  Commit interval 5 seconds
[    4.394375] EXT3 FS on dm-3, internal journal
[    4.394380] EXT3-fs: mounted filesystem with ordered data mode.
[    4.443908] kjournald starting.  Commit interval 5 seconds
[    4.444088] EXT3 FS on dm-1, internal journal
[    4.444094] EXT3-fs: mounted filesystem with ordered data mode.
[    4.449915] kjournald starting.  Commit interval 5 seconds
[    4.450096] EXT3 FS on dm-2, internal journal
[    4.450100] EXT3-fs: mounted filesystem with ordered data mode.
[   10.619069] Adding 524280k swap on /dev/local/swap.  Priority:-1 extents:1 across:524280k
[   14.778274] Initializing USB Mass Storage driver...
[   14.778307] usbcore: registered new interface driver usb-storage
[   14.778310] USB Mass Storage support registered.
[   14.857839] CAPI Subsystem Rev 1.1.2.8
[   14.868047] capifs: Rev 1.1.2.3
[   14.872994] capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
[   16.928145] ocf: module license 'BSD' taints kernel.
[   16.928147] Disabling lock debugging due to kernel taint
[   17.303416] padlock: VIA PadLock not detected.
[   17.501975] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.514972] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   17.515156] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   17.515157] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   17.515158] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   17.725771] r8169: eth0: link up
[   17.725799] r8169: eth0: link up
[   17.744143] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   17.766191] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   18.160077] r8169: eth4: link up
[   18.216486] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   18.216489] All bugs added by David S. Miller <davem@redhat.com>
[   18.249995] Bridge firewalling registered
[   18.352488] device eth3 entered promiscuous mode
[   18.401480] device eth5 entered promiscuous mode
[   20.616300] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   20.616594] br2: port 1(eth3) entering learning state
[   20.769200] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   20.769515] br0: port 1(eth5) entering learning state
[   24.533137] Netfilter messages via NETLINK v0.30.
[   24.614295] br2: port 1(eth3) entering forwarding state
[   24.638796] Ebtables v2.0 registered
[   24.767954] br0: port 1(eth5) entering forwarding state
[   27.729303] NET: Registered protocol family 10
[   28.995566] r8169: eth4: link up
[   29.459187] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[   29.784405] device br0 entered promiscuous mode
[   29.788364] device br1 entered promiscuous mode
[   29.793114] device br2 entered promiscuous mode
[   29.803111] device eth4 entered promiscuous mode
[   37.803084] eth5: no IPv6 routers present
[   37.864306] br0: no IPv6 routers present
[   37.973124] br1: no IPv6 routers present
[   38.008237] eth3: no IPv6 routers present
[   38.051901] br2: no IPv6 routers present

Masina je bohuzel 100 KM mimo, takze muzu zkouset az behem vikendu.

Zatim jsem zkousel menit ram a problem pretrvava, pro test PCI sata radice jsem zkousel zapisovat na HDD 5/10/30 Gb soubory a bez problemu. Max. nejaky vadny kabel, nebo primo deska Asus, ale to nemuzu rict na 100% vzhledem k tomu, ze Win. ten problem nemel.


Dekuju za pripadne rady

[Reklama]

[Petr]

dmesg se meni  i na

Kód: [Vybrat]

[    0.520591] pci 0000:04:00.0:   PREFETCH window: disabled
[    0.520600] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[    0.520602] pci 0000:00:1c.5:   IO window: 0xd000-0xdfff
[    0.520605] pci 0000:00:1c.5:   MEM window: 0xf7c00000-0xf7dfffff
[    0.520608] pci 0000:00:1c.5:   PREFETCH window: disabled
[    0.520617] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.520619] pci 0000:00:01.0: setting latency timer to 64
[    0.520628] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.520631] pci 0000:00:1c.0: setting latency timer to 64
[    0.520638] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.520640] pci 0000:00:1c.4: setting latency timer to 64
[    0.520647] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.520650] pci 0000:00:1c.5: setting latency timer to 64
[    0.520654] pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.520659] pci 0000:04:00.0: setting latency timer to 64
[    0.520663] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.520664] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.520666] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
[    0.520667] pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf00fffff]
[    0.520668] pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
[    0.520669] pci_bus 0000:04: resource 1 mem: [0xf7c00000-0xf7dfffff]
[    0.520671] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.520672] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.520673] pci_bus 0000:05: resource 0 io:  [0xd000-0xdfff]
[    0.520674] pci_bus 0000:05: resource 1 mem: [0xf7c00000-0xf7dfffff]
[    0.520675] pci_bus 0000:05: resource 3 io:  [0xd000-0xdfff]
[    0.520677] pci_bus 0000:05: resource 4 mem: [0xf7c00000-0xf7dfffff]
[    0.520678] pci_bus 0000:05: resource 6 io:  [0x00-0xffff]
[    0.520679] pci_bus 0000:05: resource 7 mem: [0x000000-0xffffffff]
[    0.520696] NET: Registered protocol family 2
[    0.520741] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.520887] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.521096] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.521189] TCP: Hash tables configured (established 131072 bind 65536)
[    0.521191] TCP reno registered
[    0.521247] NET: Registered protocol family 1
[    0.521258] pci 0000:00:02.0: Boot video device
[    0.521428] Trying to unpack rootfs image as initramfs...
[    0.524582] Freeing initrd memory: 123k freed
[    0.534605] DMA-API: preallocated 32768 debug entries
[    0.534606] DMA-API: debugging enabled by kernel config
[    0.536422] apm: BIOS not found.
[    0.536736] audit: initializing netlink socket (disabled)
[    0.536748] type=2000 audit(1376469947.377:1): initialized
[    0.538786] highmem bounce pool size: 64 pages
[    0.538790] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.544738] msgmni has been set to 1724
[    0.544838] SELinux:  Registering netfilter hooks
[    0.545200] alg: No test for stdrng (krng)
[    0.545303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.545304] io scheduler noop registered
[    0.545305] io scheduler deadline registered
[    0.545416] io scheduler cfq registered (default)
[    0.545537] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.545540] pcieport 0000:00:01.0: setting latency timer to 64
[    0.545728] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.545739] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.545900] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[    0.545906] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.546071] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.546072] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.547092] input: Power Button as /class/input/input0
[    0.547097] ACPI: Power Button [PWRB]
[    0.547189] input: Power Button as /class/input/input1
[    0.547190] ACPI: Power Button [PWRF]
[    0.547400] fan PNP0C0B:00: registered as cooling_device0
[    0.547405] ACPI: Fan [FAN0] (off)
[    0.547548] fan PNP0C0B:01: registered as cooling_device1
[    0.547552] ACPI: Fan [FAN1] (off)
[    0.547691] fan PNP0C0B:02: registered as cooling_device2
[    0.547695] ACPI: Fan [FAN2] (off)
[    0.547839] fan PNP0C0B:03: registered as cooling_device3
[    0.547844] ACPI: Fan [FAN3] (off)
[    0.547981] fan PNP0C0B:04: registered as cooling_device4
[    0.547992] ACPI: Fan [FAN4] (off)
[    0.549062] ACPI: SSDT 6babc018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.550495] Monitor-Mwait will be used to enter C-1 state
[    0.550510] Monitor-Mwait will be used to enter C-2 state
[    0.550523] Monitor-Mwait will be used to enter C-3 state
[    0.550629] processor LNXCPU:00: registered as cooling_device5
[    0.551527] ACPI: SSDT 6babda98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.552236] ACPI: SSDT 6babec18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.553363] processor LNXCPU:01: registered as cooling_device6
[    0.554912] processor LNXCPU:02: registered as cooling_device7
[    0.556444] processor LNXCPU:03: registered as cooling_device8
[    0.563400] thermal LNXTHERM:01: registered as thermal_zone0
[    0.563410] ACPI: Thermal Zone [TZ00] (28 C)
[    0.564161] thermal LNXTHERM:02: registered as thermal_zone1
[    0.564168] ACPI: Thermal Zone [TZ01] (30 C)
[    0.564218] isapnp: Scanning for PnP cards...
[    0.921692] isapnp: No Plug & Play device found
[    0.954103] Non-volatile memory driver v1.3
[    0.954105] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.954252] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.954935] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.957157] brd: module loaded
[    0.957198] Uniform Multi-Platform E-IDE driver
[    0.958357] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    0.958366] Probing IDE interface ide0...
[    0.961367] ide0: no devices on the port
[    0.961440] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    0.961458] Probing IDE interface ide1...
[    0.964459] ide1: no devices on the port
[    0.964535] ide1 at 0x170-0x177,0x376 on irq 15
[    0.964590] ide-gd driver 1.18
[    0.964820] usbcore: registered new interface driver libusual
[    0.964994] PNP: No PS/2 controller found. Probing ports directly.
[    0.965418] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.965421] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.965527] mice: PS/2 mouse device common for all mice
[    0.966466] cpuidle: using governor ladder
[    0.967823] cpuidle: using governor menu
[    0.969408] usbcore: registered new interface driver hiddev
[    0.969468] usbcore: registered new interface driver usbhid
[    0.969472] usbhid: v2.6:USB HID core driver
[    0.970364] TCP cubic registered
[    0.970365] Initializing XFRM netlink socket
[    0.970372] NET: Registered protocol family 17
[    0.970441] Using IPI No-Shortcut mode
[    0.970675] registered taskstats version 1
[    0.971155] Freeing unused kernel memory: 416k freed
[    0.972731] sata_sil 0000:05:02.0: version 2.4
[    0.972756] sata_sil 0000:05:02.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.972835] scsi0 : sata_sil
[    0.973127] scsi1 : sata_sil
[    0.973214] ata1: SATA max UDMA/100 mmio m512@0xf7d40000 tf 0xf7d40080 irq 19
[    0.973218] ata2: SATA max UDMA/100 mmio m512@0xf7d40000 tf 0xf7d400c0 irq 19
[    1.277730] ata1: SATA link down (SStatus 0 SControl 310)
[    1.582594] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    1.586035] ata2.00: ATA-8: WDC WD2500HHTZ-04N21V0, 04.06A00, max UDMA/133
[    1.586037] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.589766] ata2.00: configured for UDMA/100
[    1.589875] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500HHTZ-0 04.0 PQ: 0 ANSI: 5
[    1.591789] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.591791] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.591850] sd 1:0:0:0: [sda] Write Protect is off
[    1.591853] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.591876] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.591994] sda: detected capacity change from 0 to 250059350016
[    1.592001]  sda: sda1 sda2
[    1.598078] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.626151] kjournald starting.  Commit interval 5 seconds
[    1.626196] EXT3-fs: mounted filesystem with ordered data mode.
[    2.690173] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    3.076109] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.076136] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.076178] r8169 0000:03:00.0: setting latency timer to 64
[    3.076185] r8169 0000:03:00.0: unknown MAC, using family default
[    3.076266] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[    3.076521] eth0: RTL8168b/8111b at 0xf7d1e000, 60:a4:4c:c9:56:67, XID 08000800 IRQ 27
[    3.083814] ahci 0000:00:1f.2: version 3.0
[    3.083826] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.083863] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    3.094761] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    3.094765] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[    3.094769] ahci 0000:00:1f.2: setting latency timer to 64
[    3.098078] input: PC Speaker as /class/input/input2
[    3.098333] scsi2 : ahci
[    3.098405] scsi3 : ahci
[    3.098467] scsi4 : ahci
[    3.098538] scsi5 : ahci
[    3.098603] scsi6 : ahci
[    3.098664] scsi7 : ahci
[    3.098716] ata3: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12100 irq 28
[    3.098718] ata4: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12180 irq 28
[    3.098721] ata5: SATA max UDMA/133 abar m2048@0xf7e12000 port 0xf7e12200 irq 28
[    3.098722] ata6: DUMMY
[    3.098723] ata7: DUMMY
[    3.098724] ata8: DUMMY
[    3.108519] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[    3.108522] Copyright (c) 1999-2006 Intel Corporation.
[    3.108554] e1000 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.375091] e1000: 0000:05:00.0: e1000_probe: (PCI:33MHz:32-bit) 90:e2:ba:37:f7:41
[    3.402589] ata3: SATA link down (SStatus 0 SControl 300)
[    3.402613] ata4: SATA link down (SStatus 0 SControl 300)
[    3.402642] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.415076] ata5.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100
[    3.428016] ata5.00: configured for UDMA/100
[    3.429901] scsi 4:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1S   9L08 PQ: 0 ANSI: 5
[    3.430071] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[    3.453919] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.453922] Uniform CD-ROM driver Revision: 3.20
[    3.454013] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    3.521723] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[    3.521746] e1000 0000:05:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.788878] e1000: 0000:05:01.0: e1000_probe: (PCI:33MHz:32-bit) 90:e2:ba:2b:af:dc
[    3.935494] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
[    4.143901] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    4.351035] EXT3 FS on sda1, internal journal
[    4.394765] kjournald starting.  Commit interval 5 seconds
[    4.395038] EXT3 FS on dm-3, internal journal
[    4.395045] EXT3-fs: mounted filesystem with ordered data mode.
[    4.444597] kjournald starting.  Commit interval 5 seconds
[    4.444774] EXT3 FS on dm-1, internal journal
[    4.444780] EXT3-fs: mounted filesystem with ordered data mode.
[    4.450494] kjournald starting.  Commit interval 5 seconds
[    4.450675] EXT3 FS on dm-2, internal journal
[    4.450679] EXT3-fs: mounted filesystem with ordered data mode.
[   10.707604] Adding 524280k swap on /dev/local/swap.  Priority:-1 extents:1 across:524280k
[   16.883517] Initializing USB Mass Storage driver...
[   16.883544] usbcore: registered new interface driver usb-storage
[   16.883546] USB Mass Storage support registered.
[   16.951042] CAPI Subsystem Rev 1.1.2.8
[   16.951934] capifs: Rev 1.1.2.3
[   16.956498] capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
[   17.042672] ocf: module license 'BSD' taints kernel.
[   17.042674] Disabling lock debugging due to kernel taint
[   17.357948] padlock: VIA PadLock not detected.
[   17.565175] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.578406] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   17.578646] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   17.578648] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   17.578649] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   17.815735] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   17.817634] r8169: eth0: link up
[   17.817650] r8169: eth0: link up
[   17.837784] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   18.220439] r8169: eth4: link up
[   18.288056] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   18.288058] All bugs added by David S. Miller <davem@redhat.com>
[   18.321736] Bridge firewalling registered
[   18.418784] device eth3 entered promiscuous mode
[   18.467529] device eth5 entered promiscuous mode
[   20.729551] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   20.729862] br2: port 1(eth3) entering learning state
[   20.867125] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   20.868200] br0: port 1(eth5) entering learning state
[   20.952256] Ebtables v2.0 registered
[   21.394897] Netfilter messages via NETLINK v0.30.
[   21.606530] r8169: eth4: link up
[   24.727544] br2: port 1(eth3) entering forwarding state
[   24.865345] br0: port 1(eth5) entering forwarding state
[   26.319888] NET: Registered protocol family 10
[   28.525228] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[   29.500536] device br0 entered promiscuous mode
[   29.504536] device br1 entered promiscuous mode
[   29.508534] device br2 entered promiscuous mode
[   29.516529] device eth4 entered promiscuous mode
[   36.351893] eth5: no IPv6 routers present
[   36.359884] eth4: no IPv6 routers present
[   36.459817] br2: no IPv6 routers present
[   36.728636] eth3: no IPv6 routers present
[   36.875535] br0: no IPv6 routers present
[   37.160345] br1: no IPv6 routers present


[Rhinox]

[    4.450100] EXT3-fs: mounted filesystem with ordered data mode.
[   10.619069] Adding 524280k swap on /dev/local/swap.  Priority:-1 extents:1 across:524280k

Koukam ze tady je pausa 10 vterin. Ted si nejsem jistej jestli se to tyka mountovani filesytemu nebo pridavani swapu, v kazdym pripade tady neco nehraje. To nemuze trvat tak dlouho ani se sitovym diskem...

Krom toho, podival bych se taky do jinejch logu a pokusil se zjistit, co servr delal zrovna pred tim nez vytuhl. Potiz muze byt s tim ze kdyz selze pristup na disk, pak se log nema kam zapsat. Proto je dobry posilat logy po siti nekam jinam...

[Petros]

zkousel sem cronem vytvorit script, kterej kazdou vterinu zapisuje do souboru...

Kontrole loopback a pristup na paterni switch

V nahodny cas se proste kousne .... prestane kontrolvat, zapisovat...

[Petros]

oproti nemu pinga jinej server...

ve stejny cas co se sekne proxy nema druhy server odezvu od proxy

[Reklama]

[Petros]

Ten cas te prodlevy je mozna tim PCI Sata radicem ?

[Rhinox]

Mozna, jenze to je opravdu moc:

[    4.450679] EXT3-fs: mounted filesystem with ordered data mode.
[   10.707604] Adding 524280k swap on /dev/local/swap.  Priority:-1 extents:1 across:524280k
[   16.883517] Initializing USB Mass Storage driver...

Spis mi to prijde jako nakej timeout. Kernel na neco ceka, nedocka se, tak jede dal. Koukam ze na mym "servru" dmesg konci na nakejch 3-4 vterinach, u tebe temer 40. A to prakticky jeste nic nenabehlo. Co to je za HW? Ten sata-radic je opravdu PCI, nebo PCIe?

(OT: a hele jake militantni doupe! pry "doplnte nazev palne zbrane"! A ja myslel ze je to tady o pocitacich)