Uspávání v laptopu Toshiba

[ojk]

když jsem měl debian squeeze, tak mě notebook nešel probudit z uspání. Pak jsem podle návodu vložil tohle:

Kód [Vybrat] Rozbalit

<match key="system.hardware.product" string="AO751h">
   <merge key="power_management.quirk.dpms_on" type="bool">true</merge>
   <merge key="power_management.quirk.vbemode_restore" type="bool">true</merge>
   <merge key="power_management.quirk.vbestate_restore" type="bool">true</merge>
</match>
do /usr/share/hal/fdi/information/10freedesktop/20-video-quirk-pm-toshiba.fdi a pak to fungovalo. Ovladač graf. karty jsem měl fglrx-driver z repozitářů debianu stable. Po upgradu na wheeze ale probouzení opět nefunguje. (fglrx v nové verzi nepodporuje můj hw, tak jsem musel nainstalovat starší ze stránek amd, myslím, že verzi 13.1) Dovedete mi někdo poradit co s tím?

[Reklama]

[ojk]

opravdu nikdo neví, co s tím?

[noname]

Bohužel nemám notebook Toshiba a nikdy jsem s tímto neměl nejmenší potíže.
Ale jelikož tady nemáte žádnou odpověď, tak Vám alespoň navrhnu, ať se podíváte na manuálovou stránku daemona acpid, který má na starosti především napájení (a další systémové události). Co jsem se narychlo podíval, tak asi bude stát za úvahu zkontrolovat skript, který je popsaný v konfiguračním souboru umístěném na adrese /etc/acpi/events/sleepbtn a případně jej opravit. U mě je tento skript umístěn v /etc/acpi/sleep.sh. S tímhle jsem si ale nikdy nehrál, takže podrobněji těžko poradím.

[noname]

Ve zmíněném skriptu (u mě je docela krátký) naleznete příkaz, kterým se počítač uspává. Možná bude problém právě v jeho konfiguraci. U mě se jedná o pm-suspend, s konfiguračními soubory v /etc/pm/*, ale teď opravdu nemám čas se tomu podrobně věnovat. Pokud se Vám ale nebude dařit, určitě dejte vědět na fórum.

[ojk]

tak ten skript vypadá takhle:
# /etc/acpi/events/sleepbtn
# Called when the user presses the sleep button

# Note that this script is part of the SUSPEND part of acpi-support. This is
# not a key translation event, it is intended to perform a suspend if no
# power management daemon is running.

event=button[ /]sleep
action=/etc/acpi/sleep_suspend.sh sleep
je tam něco, co bych měl opravit?

[Reklama]

[#]

obsah /etc/acpi/sleep_suspend.sh?

pokud spustis jako root, probudi se pak korektne?

Kód [Vybrat] Rozbalit

echo -n "mem" > /sys/power/state

[noname]

Především se bude nutno podívat na skript /etc/acpi/sleep_suspend.sh na který je zde odkazováno.
Obsah souboru, který jste poslal podle všeho pouze říká acpid, který skript se má spustit pro přechod do spánku.
My se tedy musíme podívat na skript, na který je odkazováno a na příkazy v něm uvedené, případně na konfiguraci těchto příkazů, jestli dělají co mají a poté se podíváme, co dál.

Ale ještě mě napadla jedna věc, na kterou bych se měl zeptat:
Fakt, že se laptop neprobudí z režimu spánku znamená to, že normálně nastartuje nebo nenastartuje a vypíše nějaké chybové hlášení, kvůli kterému je nutno provést restart? Jsou o chybě nějaké podrobnější informace? Zkoušel jste najít nějaké chyby pomocí dmesg?

[noname]

Taky určitě stojí za to vyzkoušet to, co napsal host #. Ale určitě sem dejte jeho obsah, ať potom víme, co dál.

[ojk]

obsah:
#!/bin/sh

# This script HANDLES the sleep or suspend button (does not TRANSLATE it). It
# is part of the *suspend* side of acpi-support, not the special keys
# translation side. If this script is called, it is assumed to be the result of
# a suspend key press that can also be heard by other parts of the system. The
# only time that it actually does something is when it is determined that no
# other parts of the system are listening (this is what the CheckPolicy call
# does).

test -f /usr/share/acpi-support/key-constants || exit 0

. /etc/default/acpi-support
. /usr/share/acpi-support/policy-funcs

CheckPolicy && exit 0

[ x$1 != xsleep ] || [ x$ACPI_SLEEP = xtrue ] || exit 0

[ x$1 != xsuspend ] || [ x$ACPI_HIBERNATE = xtrue ] || exit 0

if [ x$LOCK_SCREEN = xtrue ]; then
   . /usr/share/acpi-support/screenblank
fi

if [ x$1 = xsleep ]; then
   pm-suspend
elif [ x$1 = xsuspend ]; then
   pm-hibernate
fi


notebook se normálně uspí, pak ho probudím, normálně jede, až na to, že nesvítí display a nefunguje klávesnce (numlock a capslock-nerozsvítí se světýlko). Žádné chybové hlášení mi to nepíše. Pokud to jde nějak zpětně zjistit z dmesg, tak jak?

[ojk]

echo -n "mem" > /sys/power/state stále stejný problém
jinak notebook musím natvrdo vypnout, jinak s tím totiž nejde nic dělat

[noname]

Nejjednodušší je do příkazového řádku napsat dmesg.
Pro omezení počtu informací a převedení do souboru bude ale lepší dmesg | tail -n 200 > ~/Desktop/dmesg.log.
200 nahraďte požadovaným počtem zobrazených řádků.

[ojk]

dmesg, část1.:
[    0.000000] kernel direct mapping tables up to 138000000 @ c7ebe000-c7ec0000
[    0.000000] RAMDISK: 36aa2000 - 37549000
[    0.00aa0000] ACPI: RSDP 00000000000f7c60 00024 (v02 TOSCPL)
[    0.000000] ACPI: XSDT 00000000c7ecc236 0005C (v01 TOSCPL TOSCPL00 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000c7edb898 000F4 (v03 AMD    ANT      06040000 ATI  000F4240)
[    0.000000] ACPI: DSDT 00000000c7ecc292 0F606 (v01 TOSCPL    SB700 06040000 MSFT 03000001)
[    0.000000] ACPI: FACS 00000000c7eddfc0 00040
[    0.000000] ACPI: TCPA 00000000c7edba00 00032 (v02 TOSCPL          06040000 PTEC 00000000)
[    0.000000] ACPI: SLIC 00000000c7edba32 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
[    0.000000] ACPI: SSDT 00000000c7edbba8 00386 (v01 AMD    POWERNOW 06040000 AMD  00000001)
[    0.000000] ACPI: APIC 00000000c7edbf2e 0005E (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 00000000c7edbf8c 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET 00000000c7edbfc8 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000138000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[    0.000000]   NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133600000-ffff880136ffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00138000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000c7ec0
[    0.000000]     0: 0x00100000 -> 0x00138000
[    0.000000] On node 0 totalpages: 1048141
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 800504 pages, LIFO batch:31
[    0.000000]   Normal zone: 3136 pages used for memmap
[    0.000000]   Normal zone: 226240 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000c7ec0000 - 00000000c7edc000
[    0.000000] PM: Registered nosave memory: 00000000c7edc000 - 00000000c7ede000
[    0.000000] PM: Registered nosave memory: 00000000c7ede000 - 00000000c8000000
[    0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000

[ojk]

část2
[    0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:18000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s82944 r8192 d23552 u1048576
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc:

• 0 1
  [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030664
  [    0.000000] Policy zone: Normal
  [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7143a539-11eb-4be1-aeab-f6199c10e80b ro quiet
  [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  [    0.000000] Checking aperture...
  [    0.000000] No AGP bridge found
  [    0.000000] Node 0: aperture @ 3200000000 size 32 MB
  [    0.000000] Aperture beyond 4GB. Ignoring.
  [    0.000000] Your BIOS doesn't leave a aperture memory hole
  [    0.000000] Please enable the IOMMU option in the BIOS setup
  [    0.000000] This costs you 64 MB of RAM
  [    0.000000] Mapping aperture over 65536 KB of RAM @ bc000000
  [    0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
  [    0.000000] Memory: 3981928k/5111808k available (3420k kernel code, 919244k absent, 210636k reserved, 3318k data, 576k init)
  [    0.000000] Hierarchical RCU implementation.
  [    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
  [    0.000000] NR_IRQS:33024 nr_irqs:512 16
  [    0.000000] spurious 8259A interrupt: IRQ7.
  [    0.000000] Console: colour VGA+ 80x25
  [    0.000000] console [tty0] enabled
  [    0.000000] hpet clockevent registered
  [    0.000000] Fast TSC calibration using PIT
  [    0.000000] Detected 1994.962 MHz processor.
  [    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.92 BogoMIPS (lpj=7979848)
  [    0.004009] pid_max: default: 32768 minimum: 301
  [    0.004065] Security Framework initialized
  [    0.004070] AppArmor: AppArmor disabled by boot time parameter
  [    0.004380] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  [    0.009027] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  [    0.009696] Mount-cache hash table entries: 256
  [    0.009833] Initializing cgroup subsys cpuacct
  [    0.009839] Initializing cgroup subsys memory
  [    0.009852] Initializing cgroup subsys devices
  [    0.009856] Initializing cgroup subsys freezer
  [    0.009859] Initializing cgroup subsys net_cls
  [    0.009862] Initializing cgroup subsys blkio
  [    0.009869] Initializing cgroup subsys perf_event
  [    0.009901] tseg: 00c7f00000
  [    0.009904] CPU: Physical Processor ID: 0
  [    0.009906] CPU: Processor Core ID: 0
  [    0.009908] mce: CPU supports 6 MCE banks
  [    0.009918] using AMD E400 aware idle routine
  [    0.010276] ACPI: Core revision 20110623
  [    0.010279] TOSHIBA Satellite detected - force copy of DSDT to local memory
  [    0.010468] ACPI: Forced DSDT copy: length 0x0F606 copied locally, original unmapped
  [    0.016492] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  [    0.059186] CPU0: AMD Athlon(tm) II Dual-Core M300 stepping 02
  [    0.060003] Performance Events: AMD PMU driver.
  [    0.060003] ... version:                0
  [    0.060003] ... bit width:              48
  [    0.060003] ... generic registers:      4
  [    0.060003] ... value mask:             0000ffffffffffff
  [    0.060003] ... max period:             00007fffffffffff
  [    0.060003] ... fixed-purpose events:   0
  

[ojk]

část3
[    0.060003] ... event mask:             000000000000000f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1 Ok.
[    0.060003] smpboot cpu 1: start_ip = 98000
[    0.148028] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148050] Brought up 2 CPUs
[    0.148053] Total of 2 processors activated (7979.81 BogoMIPS).
[    0.148049] System has AMD C1E enabled
[    0.148070] Switch to broadcast mode on CPU1
[    0.148558] Switch to broadcast mode on CPU0
[    0.148558] devtmpfs: initialized
[    0.152038] PM: Registering ACPI NVS region at c7edc000 (8192 bytes)
[    0.152259] print_constraints: dummy:
[    0.152334] NET: Registered protocol family 16
[    0.152438] node 0 link 0: io port [1000, ffff]
[    0.152441] TOM: 00000000c8000000 aka 3200M
[    0.152444] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.152448] node 0 link 0: mmio [a0000, bffff]
[    0.152451] node 0 link 0: mmio [c8000000, dfffffff]
[    0.152454] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.152457] node 0 link 0: mmio [f0000000, ffffffff]
[    0.152460] TOM2: 0000000138000000 aka 4992M
[    0.152462] bus: [00, ff] on node 0 link 0
[    0.152465] bus: 00 index 0 [io  0x0000-0xffff]
[    0.152467] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.152469] bus: 00 index 2 [mem 0xc8000000-0xdfffffff]
[    0.152472] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[    0.152474] bus: 00 index 4 [mem 0x138000000-0xfcffffffff]
[    0.152518] Extended Config Space enabled on 1 nodes
[    0.152544] ACPI: bus type pci registered
[    0.152653] PCI: MMCONFIG for domain 0000 [bus 00-29] at [mem 0xe0000000-0xe29fffff] (base 0xe0000000)
[    0.152657] PCI: MMCONFIG at [mem 0xe0000000-0xe29fffff] reserved in E820
[    0.157222] PCI: Using configuration type 1 for base access
[    0.157934] bio: create slab <bio-0> at 0
[    0.157934] ACPI: Added _OSI(Module Device)
[    0.157934] ACPI: Added _OSI(Processor Device)
[    0.157934] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.157934] ACPI: Added _OSI(Processor Aggregator Device)
[    0.157934] ACPI: EC: Look up EC in DSDT
[    0.159022] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.188296] ACPI: Interpreter enabled
[    0.188303] ACPI: (supports S0 S3 S4 S5)
[    0.188327] ACPI: Using IOAPIC for interrupt routing
[    0.189200] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.189623] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.264309] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.264918] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.265126] ACPI: No dock devices found.
[    0.265129] HEST: Table not found.
[    0.265133] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.265996] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.267648] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.267652] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
[    0.267655] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
[    0.267658] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
[    0.267661] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
[    0.267664] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
[    0.267666] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
[    0.267670] pci_root PNP0A08:00: host bridge window [mem 0xc8000000-0xdfffffff]
[    0.267673] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[    0.267676] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.267678] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.267699] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[    0.267792] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[    0.267832] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.267885] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[    0.267923] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold

[ojk]

[    0.268035] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[    0.268073] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.268090] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604
[    0.268128] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.268181] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.268202] pci 0000:00:11.0: reg 10: [io  0x8420-0x8427]
[    0.268213] pci 0000:00:11.0: reg 14: [io  0x8414-0x8417]
[    0.268224] pci 0000:00:11.0: reg 18: [io  0x8418-0x841f]
[    0.268235] pci 0000:00:11.0: reg 1c: [io  0x8410-0x8413]
[    0.268245] pci 0000:00:11.0: reg 20: [io  0x8400-0x840f]
[    0.268256] pci 0000:00:11.0: reg 24: [mem 0xf0308000-0xf03083ff]
[    0.268319] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.268333] pci 0000:00:12.0: reg 10: [mem 0xf0304000-0xf0304fff]
[    0.268403] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[    0.268417] pci 0000:00:12.1: reg 10: [mem 0xf0305000-0xf0305fff]
[    0.268493] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.268513] pci 0000:00:12.2: reg 10: [mem 0xf0308400-0xf03084ff]
[    0.268601] pci 0000:00:12.2: supports D1 D2
[    0.268604] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.268630] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.268645] pci 0000:00:13.0: reg 10: [mem 0xf0306000-0xf0306fff]
[    0.268715] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[    0.268729] pci 0000:00:13.1: reg 10: [mem 0xf0307000-0xf0307fff]
[    0.268805] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.268826] pci 0000:00:13.2: reg 10: [mem 0xf0308800-0xf03088ff]
[    0.268913] pci 0000:00:13.2: supports D1 D2
[    0.268916] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.268948] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.269056] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.269080] pci 0000:00:14.2: reg 10: [mem 0xf0300000-0xf0303fff 64bit]
[    0.269150] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.269167] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.269249] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.269300] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[    0.269320] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[    0.269336] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[    0.269352] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[    0.269372] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[    0.269461] pci 0000:02:00.0: [1002:9553] type 0 class 0x000300
[    0.269472] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.269480] pci 0000:02:00.0: reg 14: [io  0x9000-0x90ff]
[    0.269488] pci 0000:02:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[    0.269512] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.269544] pci 0000:02:00.0: supports D1 D2
[    0.269565] pci 0000:02:00.1: [1002:aa38] type 0 class 0x000403
[    0.269576] pci 0000:02:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
[    0.269639] pci 0000:02:00.1: supports D1 D2
[    0.280054] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.280061] pci 0000:00:02.0:   bridge window [io  0x9000-0x9fff]
[    0.280065] pci 0000:00:02.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.280070] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]