Ještě jsem zkusil pomocí Redo backup zazálohovat a obnovit bezcennou flashku, v terminálu proces vypadá takto:
root@ubuntu:~# sudo redobackup
/usr/share/themes/MurrinaAquaIsh/gtk-2.0/gtkrc:50: Murrine configuration option "scrollbar_color" is no longer supported and will be ignored.
*** sda ***
desc = Drive 1 (465.76 GB): WDC WD5000BPVT-0 (Windows 7 (loader), 29.30 GB NTFS) (Bridge-boot, 200.00 MB EXT2) (2.15 GB SWAP) (Bridge Linux (2012.7 LXDE), 29.30 GB EXT4) (Ubuntu 12.04.1 LTS (12.04), 14.65 GB EXT4) (Bridge Linux (2012.7 LXDE), 14.65 GB EXT4) (Data, 375.52 GB EXT4)
device = sda
drivenum = 1
model = WDC WD5000BPVT-0
parts = HASH(0x8a62330)
Part 1:
fstype = NTFS
label = Widle7
os = Windows 7 (loader)
partition = sda1
size = 29.30 GB
Part 2:
fstype = EXT2
label = Bridge-boot
os =
partition = sda2
size = 200.00 MB
Part 4:
fstype = SWAP
label =
os =
partition = sda4
size = 2.15 GB
Part 5:
fstype = EXT4
label = Bridge-root
os = Bridge Linux (2012.7 LXDE)
partition = sda5
size = 29.30 GB
Part 6:
fstype = EXT4
label = Ubuntu
os = Ubuntu 12.04.1 LTS (12.04)
partition = sda6
size = 14.65 GB
Part 7:
fstype = EXT4
label = Bridge-test
os = Bridge Linux (2012.7 LXDE)
partition = sda7
size = 14.65 GB
Part 8:
fstype = EXT4
label = Data
os =
partition = sda8
size = 375.52 GB
size = 465.76 GB
type = scsi
*** sdb ***
desc = Drive 2 (243.50 MB): USB DataTraveler 2.0 (Kingston, 243.50 MB VFAT)
device = sdb
drivenum = 2
model = DataTraveler 2.0
parts = HASH(0x8a34a40)
Part 1:
fstype = VFAT
label = Kingston
os =
partition = sdb1
size = 243.50 MB
size = 243.50 MB
type = usb
*** sdc ***
desc = Drive 3 (970.00 MB): USB TS1GJFV30
device = sdc
drivenum = 3
model = TS1GJFV30
parts = HASH(0x8a62310)
size = 970.00 MB
type = usb
Obtaining partitions for drive sdb...
*** Omitting backup source sdb1 from destination list
umount: /mnt/backup: not mounted
* Executing: mount /dev/sda6 /mnt/backup
Free space: 10004
*** Backup sdb to /mnt/backup/home/vasek/Hudba ***
1+0 records in
1+0 records out
32768 bytes (33 kB) copied, 0.00987823 s, 3.3 MB/s
* MBR and partition table of /dev/sdb saved to /mnt/backup/home/vasek/Hudba
* Size of /dev/sdb (255327744 bytes) saved to /mnt/backup/home/vasek/Hudba/20120926.size
Free space: 9.8G
* Partition list saved to /mnt/backup/home/vasek/Hudba/20120926.backup
* Total partitions to save: 1
*** Processing sdb1 (vfat) using partclone.fat...
umount: /dev/sdb1: not mounted
*** Executing: ( partclone.fat -c -F -L /partclone.log -s /dev/sdb1 | gzip -c --fast | split -d -a 3 -b 2048m - //mnt/backup/home/vasek/Hudba/20120926_part1. ) 2>&1 |
Partclone v0.2.38 http://partclone.org
>>> Starting to clone sdb1
>>> List of partitions:
* sdb1 (Processing)
>>> Reading super block
>>> Warning: Filesystem isn't in valid state. May be it is not cleanly unmounted.
>>> Warning: Filesystem isn't in valid state. May be it is not cleanly unmounted.
Total Time: 00:00:01, 100.00% completed!
done!
File system: FAT16
>>> Device size: 255.3 MB
>>> Space in use: 45.6 MB
Free Space: 209.8 MB
Block size: 512 Byte
Used block : 89003
Elapsed time: *00:00:01* Remaining: *00:00:45* Percent: *2.17* Rate: *59.32MB/min*
Elapsed time: *00:00:02* Remaining: *00:00:10* Percent: *16.65* Rate: *227.59MB/min*
Elapsed time: *00:00:03* Remaining: *00:00:06* Percent: *31.03* Rate: *282.80MB/min*
Elapsed time: *00:00:04* Remaining: *00:00:04* Percent: *45.41* Rate: *310.40MB/min*
Elapsed time: *00:00:05* Remaining: *00:00:03* Percent: *59.18* Rate: *323.62MB/min*
Elapsed time: *00:00:06* Remaining: *00:00:02* Percent: *73.94* Rate: *336.95MB/min*
Elapsed time: *00:00:07* Remaining: *00:00:00* Percent: *88.32* Rate: *344.98MB/min*
Elapsed time: *00:00:08* Remaining: *00:00:00* Percent: *100.00* Rate: *341.76MB/min*
Elapsed time: *00:00:08* Remaining: *00:00:00* Percent: *100.00* Rate: *341.77MB/min*
Total Time: 00:00:08, Ave. Rate: 341.8MB/min, 100.00% completed!
Syncing... OK!
>>> Partition sdb1 completed.
Current part: 1
Total parts: 1
>>> Operation complete.
root@ubuntu:~# sudo redobackup
/usr/share/themes/MurrinaAquaIsh/gtk-2.0/gtkrc:50: Murrine configuration option "scrollbar_color" is no longer supported and will be ignored.
umount: /mnt/backup: not mounted
* Executing: mount /dev/sda6 /mnt/backup
Comparing sda to sdb...
*** Size of original drive: 255327744 bytes
*** Size of destination drive: 255327744 bytes
umount: /mnt/sdb?*: not found
*** Writing MBR to sdb
1+0 records in
1+0 records out
32768 bytes (33 kB) copied, 0.053119 s, 617 kB/s
*** Restoring partition table to sdb
Checking that no-one is using this disk right now ...
OK
Disk /dev/sdb: 1021 cylinders, 8 heads, 61 sectors/track
Old situation:
Warning: The partition table looks like it was made
for C/H/S=*/129/4 (instead of 1021/8/61).
For this listing I'll assume that geometry.
Units = cylinders of 264192 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sdb1 * 0+ 966- 967- 249341+ e W95 FAT16 (LBA)
end: (c,h,s) expected (966,57,3) found (972,128,4)
/dev/sdb2 0 - 0 0 0 Empty
/dev/sdb3 0 - 0 0 0 Empty
/dev/sdb4 0 - 0 0 0 Empty
New situation:
Warning: The partition table looks like it was made
for C/H/S=*/8/12 (instead of 1021/8/61).
For this listing I'll assume that geometry.
Units = sectors of 512 bytes, counting from 0
Device Boot Start End #sectors Id System
/dev/sdb1 * 4 498686 498683 e W95 FAT16 (LBA)
end: (c,h,s) expected (1023,7,12) found (1021,7,12)
/dev/sdb2 0 - 0 0 Empty
/dev/sdb3 0 - 0 0 Empty
/dev/sdb4 0 - 0 0 Empty
Warning: partition 1 does not end at a cylinder boundary
Successfully wrote the new partition table
Re-reading the partition table ...
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
*** Reloading partition table from sdb
umount: /mnt/sdb?*: not found
*** Verifying that /dev/sdb1 exists and can be restored to: OK
umount: /mnt/sdb1: not found
1000+0 records in
1000+0 records out
1024000 bytes (1.0 MB) copied, 0.336126 s, 3.0 MB/s
*** Processing sdb1 using partclone.restore...
umount: /dev/sdb1: not mounted
*** Executing: ( cat //mnt/backup/home/vasek/Hudba/20120926_part1.* | gzip -d -c | partclone.restore -F -L /partclone.log -O /dev/sdb1 ) 2>&1 |
Partclone v0.2.38 http://partclone.org
>>> Starting to restore sdb1
>>> List of partitions:
* sdb1 (Processing)
>>> Calculating bitmap
File system: FAT16
>>> Device size: 255.3 MB
>>> Space in use: 45.6 MB
Free Space: 209.8 MB
Block size: 512 Byte
Used block : 89003
Elapsed time: *00:00:01* Remaining: *00:00:02* Percent: *26.43* Rate: *722.53MB/min*
Elapsed time: *00:00:02* Remaining: *00:00:00* Percent: *72.90* Rate: *996.56MB/min*
Elapsed time: *00:00:02* Remaining: *00:00:00* Percent: *100.00* Rate: *1.37GB/min*
Total Time: 00:00:02, Ave. Rate: 1.4GB/min, 100.00% completed!
Syncing... OK!
Partclone successfully restored the image (-) to the device (/dev/sdb1)
>>> Partition sdb1 completed.
Current part: 1
Total parts: 1
*** Writing MBR to sdb
1+0 records in
1+0 records out
32768 bytes (33 kB) copied, 0.000401865 s, 81.5 MB/s
>>> Operation complete.
root@ubuntu:~#
Třeba to někomu napoví, jak postupovat.