Zamrznutí instalace Ubuntu 10.04 (10.10)

JirkaLLL

« Poslední změna: 01. 11. 2011, 06:55:41 od Petr Krčmář »


Re: Zamrznutí instalace ubuntu 10.04(10.10)
« Odpověď #1 kdy: 29. 10. 2011, 11:32:43 »
No ak to niejee nejake SW vada tak by som to tipoval na ten HDD. Ked tam davas to Ubuntu, skus ho nabootovvat do grafickeho rezimu a priano v ubunte je Disky Utiliy, alebo ako sa to vola. Tam si mozes pozriet SMART status a zistit ci tam nejmas nejake vadne clustery.

JirkaLLL

Re: Zamrznutí instalace ubuntu 10.04(10.10)
« Odpověď #2 kdy: 29. 10. 2011, 12:39:45 »
Tady davam vypis ze smartctl...ale naprosto tomu nerozumim.

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.4-pmagic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F3
Device Model:     SAMSUNG HD502HJ
Serial Number:    S20BJ90B974726
LU WWN Device Id: 5 0024e9 20623ef74
Firmware Version: 1AJ10001
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Sat Oct 29 10:36:44 2011 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 121)   The previous self-test completed having
               the read element of the test failed.
Total time to complete Offline
data collection:       ( 4680) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     (  78) minutes.
SCT capabilities:           (0x003f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   098   098   051    Pre-fail  Always       -       1343
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   064   062   025    Pre-fail  Always       -       11210
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       26
  5 Reallocated_Sector_Ct   0x0033   051   051   010    Pre-fail  Always       -       2051
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       4
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       1
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       27
191 G-Sense_Error_Rate      0x0022   252   252   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   064   000    Old_age   Always       -       28 (Min/Max 21/31)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   051   051   000    Old_age   Always       -       2051
197 Current_Pending_Sector  0x0032   098   098   000    Old_age   Always       -       88
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       255
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       1
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       28

SMART Error Log Version: 1
ATA Error Count: 543 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 543 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 07 79 10 00 e0  Error: UNC 7 sectors at LBA = 0x00001079 = 4217

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 78 10 00 e0 0a      00:00:02.807  READ DMA
  27 00 00 00 00 00 e0 0a      00:00:02.807  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 0a      00:00:02.807  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 0a      00:00:02.807  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 0a      00:00:02.807  READ NATIVE MAX ADDRESS EXT

Error 542 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 07 79 10 00 e0  Error: UNC 7 sectors at LBA = 0x00001079 = 4217

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 78 10 00 e0 0a      00:00:02.806  READ DMA
  27 00 00 00 00 00 e0 0a      00:00:02.806  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 0a      00:00:02.806  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 0a      00:00:02.806  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 0a      00:00:02.806  READ NATIVE MAX ADDRESS EXT

Error 541 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 07 79 10 00 e0  Error: UNC 7 sectors at LBA = 0x00001079 = 4217

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 78 10 00 e0 0a      00:00:02.805  READ DMA
  27 00 00 00 00 00 e0 0a      00:00:02.805  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 0a      00:00:02.805  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 0a      00:00:02.805  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 0a      00:00:02.805  READ NATIVE MAX ADDRESS EXT

Error 540 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 07 79 10 00 e0  Error: UNC 7 sectors at LBA = 0x00001079 = 4217

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 78 10 00 e0 0a      00:00:02.804  READ DMA
  27 00 00 00 00 00 e0 0a      00:00:02.804  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 0a      00:00:02.804  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 0a      00:00:02.804  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 0a      00:00:02.804  READ NATIVE MAX ADDRESS EXT

Error 539 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 07 79 10 00 e0  Error: UNC 7 sectors at LBA = 0x00001079 = 4217

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 78 10 00 e0 0a      00:00:02.803  READ DMA
  27 00 00 00 00 00 e0 0a      00:00:02.803  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 0a      00:00:02.803  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 0a      00:00:02.803  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 0a      00:00:02.803  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%         4         1845
# 2  Short offline       Completed: read failure       90%         4         1845
# 3  Short offline       Completed: read failure       90%         4         1845
# 4  Short offline       Completed: read failure       90%         3         1845
# 5  Extended offline    Completed: read failure       90%         3         1845
# 6  Extended offline    Completed: read failure       90%         3         1844
# 7  Short offline       Completed: read failure       90%         3         1844

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed_read_failure [90% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Pavelghoul.

Re: Zamrznutí instalace ubuntu 10.04(10.10)
« Odpověď #3 kdy: 29. 10. 2011, 13:57:06 »
Dále se zmenšila velikost disku (hdd ukazuje kapacitu o cca 50gb menší) při manipulaci v gparted live / parted magic live. Na 90% si myslím že je to hdd. Může mi to někdo vyvrátim / potvrdit z toho výpisu? Díky.

JardaP .

  • *****
  • 11 064
    • Zobrazit profil
    • E-mail
Re: Zamrznutí instalace ubuntu 10.04(10.10)
« Odpověď #4 kdy: 29. 10. 2011, 15:37:53 »
Vypalte knoppix, nabootujte (nejlepe do textoveho rezimu), pustte badblocks. Melo by to jit i pustit na dane zarizeni, nejen urcity oddil, tedy badblocks -ws /dev/hdd . Pozor, volba -w zdevastuje data na disku a uz se k nim nedostane asi ani CIA.

Pokud to projde, rozdelte disk pomoci cfdisk a vytvorte ext4 rucne. Zkuste nainstalovat Ubuntu a vynechejte kroky deleni disku a formatovani.


Re: Zamrznutí instalace ubuntu 10.04(10.10)
« Odpověď #5 kdy: 29. 10. 2011, 22:27:17 »
Zmensenie kapacity nieje nic neobvykle, ak je to novy disk. Aj moj 1TB nema 1tera ale len 9xxGB. To su len reklamne bachorky predajcov :) Skusil by som to rozdelit pod inym systemom ako tu uz bolo pisane, samemu mi to niekedy pomohlo a starucky PCRlinux mi par krat usetril vela nervov. Otazne vsak je ci nehodi chybu pri naslednej instalacii, ked bude potreba vytvorit tabulku rozdelenia diskov. Za skusku to vsak stoji.

Pavelghoul.

Re: Zamrznutí instalace ubuntu 10.04(10.10)
« Odpověď #6 kdy: 29. 10. 2011, 23:18:55 »
Zapnul jsem badblocks tak zítra to snad už doběhne  :D jinak reklamace, disk mám tři dny. To zmenšení je tím, že když jsem rozděloval disk při pokusech nainstalování tak některý partions potom zmizely, a gparted je nevidí.

Pavelghoul.

Re: Zamrznutí instalace ubuntu 10.04(10.10)
« Odpověď #7 kdy: 31. 10. 2011, 22:45:28 »
Tak badblocks 45h ale příliš mi to nepomohlo. Hážu sem jen odkaz ať na screen abych nebyl za úplnýho idiota.
http://imageshack.us/photo/my-images/59/20111031155348.jpg/
http://imageshack.us/photo/my-images/257/20111031155355.jpg/
http://imageshack.us/photo/my-images/24/20111031215528.jpg/

Rád by už to pc zprovoznil, zkoušel sem nainstalovat Xp co mám doma ale taky bez šance. Zamrzne.

Poslat disk na reklamaci? (nevím jak dlouho reklamace trvá u disku atd, ideální by byla výměna na místě ale nedělám si iluze).



Pavelghoul.

Re: Zamrznutí instalace ubuntu 10.04(10.10)
« Odpověď #8 kdy: 31. 10. 2011, 23:06:21 »
Chtěl jsem objednat rovnou nový hdd abych nečekal na reklamaci ale ten nárůst cen je nářez. Z 1 399,72 Kč na 2 305,70 Kč za necelý týden....

Re: Zamrznutí instalace Ubuntu 10.04 (10.10)
« Odpověď #9 kdy: 01. 11. 2011, 21:30:52 »
Vyřešeno.

Reklamoval jsem disk v softcomu a vše už funguje bezproblému.

Pavel 'TIGER' Růžička

Re: Zamrznutí instalace Ubuntu 10.04 (10.10)
« Odpověď #10 kdy: 01. 11. 2011, 22:08:12 »
Občas se stane, s tím nic nenaděláš, jinak doporučím na zjišťování závat je skvělé distro system rescue cd. Není špatné to mít vždy při ruce. Jen nechápu, jak je možné, že jsem toto vlákno přehlédl? :-D Jo jo, disky jsou teď dost vysoko vyšroubované a lepší časy v nedohlednu. Teď je ta doba, kdy se zvažuje HDD, nebo SSD.