Podpora tiskárny Epson: chybí LSB v Debianu 11

Jigdo

  • ***
  • 145
    • Zobrazit profil
    • E-mail
Podpora tiskárny Epson: chybí LSB v Debianu 11
« kdy: 23. 12. 2021, 10:54:45 »
Snazim se na Debain 11 64bit rozchodit tiskarnu EPSON XP-2100 serie (kterou uz byvaly majitel nepotrebuje),
ze stranek vyrobce jsem stahnul:
- epson-inkjet-printer-escpr_1.7.17-1lsb3.2_amd64.deb
- epson-printer-utility_1.1.1-1lsb3.2_amd64.deb
- epsonscan2-bundle-6.6.40.0.x86_64.deb.tar.gz

ale zadrhel je v tom ze to chce LSB ktere debian uz nesparvuje podle
https://wiki.debian.org/DebianLsb
a "lsb-release lsb-base" uz mam v systemu nainstalovane a "lsb-compat" je uz jen v Debian 10/Stretch

Zkousel jsem lsb z Centos/RedHat

wget http://mirror.centos.org/centos/8/AppStream/x86_64/os/Packages/redhat-lsb-4.1-47.el8.x86_64.rpm
sudo alien --to-deb -c redhat-lsb-4.1-47.el8.x86_64.rpm
sudo apt install ./redhat-lsb_4.1-48_amd64.deb

Ale po instalaci stale LSB chybi :(
« Poslední změna: 23. 12. 2021, 11:54:34 od Petr Krčmář »


Jigdo

  • ***
  • 145
    • Zobrazit profil
    • E-mail
Re:Podpora tiskárny Epson: chybí LSB v Debianu 11
« Odpověď #1 kdy: 23. 12. 2021, 12:17:30 »
Po pripojeni USB kabelem se tiskarna v dmesg ukaze takto:

Kód: [Vybrat]
[86997.655520] usb 2-1: new high-speed USB device number 4 using xhci_hcd
[86997.815678] usb 2-1: New USB device found, idVendor=04b8, idProduct=114e, bcdDevice= 1.00
[86997.815682] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[86997.815684] usb 2-1: Product: XP-2100 Series
[86997.815686] usb 2-1: Manufacturer: EPSON
[86997.815687] usb 2-1: SerialNumber: 543210123456789012
[86997.844603] usblp 2-1:1.1: usblp2: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x114E
[86997.844642] usbcore: registered new interface driver usblp
[87002.945151] process 'lib/cups/backend/z600' started with executable stack
[87002.968086] usblp2: removed
[87002.982760] usblp 2-1:1.1: usblp2: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x114E
[87080.327513] usblp2: removed
[87096.926419] usblp 2-1:1.1: usblp2: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x114E
[87311.550878] usb 2-1: USB disconnect, device number 4
[87311.552714] usblp2: removed
[87311.871230] usb 2-1: new full-speed USB device number 5 using xhci_hcd
[87311.999188] usb 2-1: device descriptor read/64, error -71
[87312.243238] usb 2-1: device descriptor read/64, error -71
[87312.479268] usb 2-1: new full-speed USB device number 6 using xhci_hcd
[87312.607243] usb 2-1: device descriptor read/64, error -71
[87313.148540] usb 2-1: not running at top speed; connect to a high speed hub
[87313.156604] usb 2-1: New USB device found, idVendor=04b8, idProduct=114e, bcdDevice= 1.00
[87313.156612] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[87313.156615] usb 2-1: Product: XP-2100 Series
[87313.156618] usb 2-1: Manufacturer: EPSON
[87313.156621] usb 2-1: SerialNumber: 543210123456789012
[87313.158740] usb 2-1: can't set config #1, error -71
[88541.952103] usblp 2-1:1.1: usblp2: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04B8 pid 0x114E
[88541.953714] usblp2: removed

Automaticky se nainstaluje ovladac ;) a tisk funguje, ale "scanner" ne :(



sudo sane-find-scanner

Kód: [Vybrat]
  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x04b8, product=0x114e) at libusb:002:006
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.



scanimage -L
Kód: [Vybrat]
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


Wi-Fi tisk nekdo?

« Poslední změna: 23. 12. 2021, 12:24:35 od Jigdo »