Externí disk se hlásí jako CD-ROM

[JardaP .]

@Ivan Nový: Pokud by se jednalo o tuto situaci, melo by porad byt videt zarizeni odpovidajici dane oblasti disku. Pri pokusu o mount z CLI by asi mount rval, ze ntfs odil je spinavy, ale mel by umoznit alespon namontovani read only. A asi i vynuceni mountu navzdory dirty bitu.

@Lol Phirae: Korektni citat je "slunce žblunce".

[Reklama]

[Ivan Nový]

@Ivan Nový: Pokud by se jednalo o tuto situaci, melo by porad byt videt zarizeni odpovidajici dane oblasti disku. Pri pokusu o mount z CLI by asi mount rval, ze ntfs odil je spinavy, ale mel by umoznit alespon namontovani read only. A asi i vynuceni mountu navzdory dirty bitu.

@Lol Phirae: Korektni citat je "slunce žblunce".

Měl jsem obdobný případ, nenamoutoval nic, ale hlásil, že je třeba udělat chkdsk /f na Windows. Jak jsem pochopil, autor dotazu to s klientem řeší na dálku, takže je docela možné, že nemá všechny informace. Ale to byl jen takový nápad.

[JardaP .]

@Ivan Nový: Ano, to je mozne. Nicmene by minimalne melo byt videt zarizeni. Pokus o mount muze hodit chybu, ale read only by to melo jit i s dirty bitem. Tazatel by sem mel hodit fdisk -l pro dany disk.

[beer]

Kód: [Vybrat]

$ lsscsi
[0:0:0:0]    disk    ATA      ADATA XM11 128GB BBF0  /dev/sda
[6:0:0:0]    disk    USB3.0 D Super Speed Mass 0     -       
[6:0:0:1]    cd/dvd  ASMT     VirtualCDROM           /dev/sr0

Kód: [Vybrat]

# fdisk -l
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/sda: 111,8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 35C03CBB-0953-486E-B8C3-52F94BA660AA


Zařízení       Start     Konec   Sektory   Size Druh
/dev/sda1       2048   1050623   1048576   512M EFI System
/dev/sda2    1050624 226252799 225202176 107,4G Linux filesystem
/dev/sda3  226252800 234440703   8187904   3,9G Linux swap

[beer]

Usage: u3-tool [options] <device name>



For the device name use:
  '/dev/sda0', '/dev/sg3

Kód: [Vybrat]

u3-tool -i Super Speed Mass 0
Error opening device: No such file or directory
 u3-tool -i "Super Speed Mass 0"
Error opening device: No such file or directory
 u3-tool -i "Super\ \Speed\ \Mass\ \0"
Error opening device: No such file or directory
 u3-tool -i Super\ \Speed\ \Mass\ \0
Error opening device: No such file or directory

Odpověď Asusu majitelce:

"Vážený zákazníku,[/size]detekci zařízení má na starosti operační systém. Externí disk nemá ani žádné ovladače. Protože Linux Ubuntu není společností ASUS podporován, obraťte se na výrobce operačního systému pro podporu, prosím."

Co teď? Já bych to přece jen rád rozchodil, bez poškození toho disku a bez tráty dat...

[Reklama]

[beer]

Tak, do windows 10 stačilo připojit, a hned funguje, bez instalace nějakých ovladačů. Je vidět jak cd, tak i disk samotný.

[JardaP .]

Odpověď Asusu majitelce:

"Vážený zákazníku,[/size]detekci zařízení má na starosti operační systém. Externí disk nemá ani žádné ovladače. Protože Linux Ubuntu není společností ASUS podporován, obraťte se na výrobce operačního systému pro podporu, prosím."

Tim jako chteji rici, ze delaji nejaky disk, ktery se hlasi jako neco jineho, nez USB storage nebo co?

[Trubicoid2]

Ve windows data určitě zálohuj a asi se připrav je dát na jinej disk.

Ten u3-tool používáš špatně, má to být asi

Kód: [Vybrat]

u3-tool /dev/sg2
Číslo sg najdeš pomocí sg_map -i,  jako tu (mimochodem mají ten stejný problém s WD)

http://www.linuxquestions.org/questions/linux-hardware-18/can't-mount-external-hdd-dev-sdb-wasn't-created-4175485713/

[beer]

Kód: [Vybrat]

sudo sg_map -i
[sudo] heslo pro medved:
/dev/sg0  /dev/sda  ATA       ADATA XM11 128GB  BBF0
/dev/sg1  USB3.0 D  Super Speed Mass  0   
/dev/sg2  /dev/sr0  ASMT      VirtualCDROM


Kód: [Vybrat]


sudo u3-tool -i /dev/sg1
u3_partition_info() failed: Device reported command failed: status 1


Kód: [Vybrat]

sudo mount /dev/sg1 /mnt
mount:  /dev/sg1 is not a block device

dmesg

Kód: [Vybrat]


[ 1682.332885] usb 2-1.2: USB disconnect, device number 5
[ 1688.382795] usb 2-1.2: new high-speed USB device number 6 using ehci-pci
[ 1688.589306] usb 2-1.2: New USB device found, idVendor=0b05, idProduct=17b4
[ 1688.589317] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1688.589323] usb 2-1.2: Product: Super Speed Mass Storage
[ 1688.589328] usb 2-1.2: Manufacturer: USB3.0 Device
[ 1688.589333] usb 2-1.2: SerialNumber: 2020120509000060
[ 1688.589970] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[ 1688.593042] scsi host8: usb-storage 2-1.2:1.0
[ 1689.628327] scsi 8:0:0:0: Direct-Access     USB3.0 D Super Speed Mass 0    PQ: 1 ANSI: 0
[ 1689.629210] scsi 8:0:0:1: CD-ROM            ASMT     VirtualCDROM          PQ: 0 ANSI: 0
[ 1689.630743] scsi 8:0:0:0: Attached scsi generic sg1 type 0
[ 1689.632598] sr 8:0:0:1: [sr0] scsi-1 drive
[ 1689.633127] sr 8:0:0:1: Attached scsi CD-ROM sr0
[ 1689.633706] sr 8:0:0:1: Attached scsi generic sg2 type 5


[beer]

Kód: [Vybrat]

usb-devices


T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.04
S:  Manufacturer=Linux 4.4.0-38-generic ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1a.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub


T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 6
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0024 Rev=00.00
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub


T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=5719 Rev=09.19
S:  Manufacturer=Azurewave
S:  Product=USB2.0 VGA Webcam
S:  SerialNumber=NULL
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo


T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.04
S:  Manufacturer=Linux 4.4.0-38-generic ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub


T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 8
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0024 Rev=00.00
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub


T:  Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=17b4 Rev=01.00
S:  Manufacturer=USB3.0 Device
S:  Product=Super Speed Mass Storage
S:  SerialNumber=2020120509000060
C:  #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage


T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.04
S:  Manufacturer=Linux 4.4.0-38-generic xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:03:00.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub


T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 2
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev=04.04
S:  Manufacturer=Linux 4.4.0-38-generic xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:03:00.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub


[beer]

Kód: [Vybrat]

udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent


KERNEL[3234.490418] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:0/bsg/10:0:0:0 (bsg)
KERNEL[3234.491115] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:0/scsi_generic/sg1 (scsi_generic)
KERNEL[3234.491172] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:0/scsi_device/10:0:0:0 (scsi_device)
KERNEL[3234.491342] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:0 (scsi)
KERNEL[3234.491726] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:1/bsg/10:0:0:1 (bsg)
UDEV  [3234.493073] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:0/bsg/10:0:0:0 (bsg)
UDEV  [3234.493366] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:0/scsi_generic/sg1 (scsi_generic)
KERNEL[3234.494854] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:1/scsi_generic/sg2 (scsi_generic)
KERNEL[3234.494919] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:1/scsi_device/10:0:0:1 (scsi_device)
UDEV  [3234.495152] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:1/bsg/10:0:0:1 (bsg)
KERNEL[3234.495754] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:1/block/sr0 (block)
KERNEL[3234.495830] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:1 (scsi)
UDEV  [3234.497575] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:1/scsi_device/10:0:0:1 (scsi_device)
UDEV  [3234.497648] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:0/scsi_device/10:0:0:0 (scsi_device)
UDEV  [3234.497740] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:1/scsi_generic/sg2 (scsi_generic)
UDEV  [3234.497948] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:1/block/sr0 (block)
UDEV  [3234.499216] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:0 (scsi)
UDEV  [3234.501017] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0/10:0:0:1 (scsi)
KERNEL[3234.513688] remove   /devices/virtual/bdi/11:0 (bdi)
KERNEL[3234.513750] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0 (scsi)
KERNEL[3234.513784] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/scsi_host/host10 (scsi_host)
KERNEL[3234.513823] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10 (scsi)
KERNEL[3234.514090] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
KERNEL[3234.514311] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
UDEV  [3234.516530] remove   /devices/virtual/bdi/11:0 (bdi)
UDEV  [3234.516587] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/target10:0:0 (scsi)
UDEV  [3234.516627] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10/scsi_host/host10 (scsi_host)
UDEV  [3234.517618] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host10 (scsi)
UDEV  [3234.519023] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
UDEV  [3234.522125] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
KERNEL[3236.767040] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
KERNEL[3236.767962] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
KERNEL[3236.771361] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11 (scsi)
KERNEL[3236.771482] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/scsi_host/host11 (scsi_host)
UDEV  [3237.298151] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
UDEV  [3237.304466] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
UDEV  [3237.304531] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11 (scsi)
UDEV  [3237.304574] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/scsi_host/host11 (scsi_host)
KERNEL[3237.770892] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0 (scsi)
KERNEL[3237.771016] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:0 (scsi)
KERNEL[3237.771196] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:0/scsi_device/11:0:0:0 (scsi_device)
KERNEL[3237.771346] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:0/scsi_generic/sg1 (scsi_generic)
KERNEL[3237.771555] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:0/bsg/11:0:0:0 (bsg)
KERNEL[3237.771747] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1 (scsi)
KERNEL[3237.774233] add      /devices/virtual/bdi/11:0 (bdi)
KERNEL[3237.774525] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1/block/sr0 (block)
UDEV  [3237.774604] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0 (scsi)
KERNEL[3237.774777] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1/scsi_device/11:0:0:1 (scsi_device)
KERNEL[3237.775420] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1/scsi_generic/sg2 (scsi_generic)
KERNEL[3237.775776] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1/bsg/11:0:0:1 (bsg)
UDEV  [3237.777671] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:0 (scsi)
KERNEL[3237.777890] change   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1/block/sr0 (block)
UDEV  [3237.779681] add      /devices/virtual/bdi/11:0 (bdi)
UDEV  [3237.780438] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:0/scsi_device/11:0:0:0 (scsi_device)
UDEV  [3237.780525] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1 (scsi)
UDEV  [3237.784366] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:0/scsi_generic/sg1 (scsi_generic)
UDEV  [3237.785544] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:0/bsg/11:0:0:0 (bsg)
UDEV  [3237.786795] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1/scsi_generic/sg2 (scsi_generic)
UDEV  [3237.786857] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1/scsi_device/11:0:0:1 (scsi_device)
UDEV  [3237.787436] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1/bsg/11:0:0:1 (bsg)
UDEV  [3239.096620] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1/block/sr0 (block)
UDEV  [3239.137395] change   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host11/target11:0:0/11:0:0:1/block/sr0 (block)


[ByCzech]

To je divné, detekuje to jedno zařízení rozdělené na 2 LUN, ale dev se přiřadí jen jen pro CD/DVD na LUN 1. Pro LUN 0 přestože je detekován jako disk nepřiřadí zařízení /dev/sdX.

Není možné, že je chyba v *buntím patchovaném kernelu? Co zkusit třeba live sysresccd jestli ho uvidí správně? Přijde mi, že se to nadetekovalo. Další věc, jsou tam vůbec partice?

[JardaP .]

Další věc, jsou tam vůbec partice?

Tedy disk bez oddilu jsem zatim na Linuxu nezkousel, ale predpokladam, ze by to nebyl problem. Na USB flashkach to tak bezne byva a chodi to bez problemu. Samozrejme tam ale neni zadny parazitni fake CD-ROM, pokud by to necemu melo vadit.

[trubicoid2]

To je divné, detekuje to jedno zařízení rozdělené na 2 LUN, ale dev se přiřadí jen jen pro CD/DVD na LUN 1. Pro LUN 0 přestože je detekován jako disk nepřiřadí zařízení /dev/sdX.

Není možné, že je chyba v *buntím patchovaném kernelu? Co zkusit třeba live sysresccd jestli ho uvidí správně? Přijde mi, že se to nadetekovalo. Další věc, jsou tam vůbec partice?

Ne, dela to vice lidem na vice kernelech. Bych tedy myslel, ze to v Linuxu nepojede a dal bych data na jinej disk

[Lol Phirae]

Za ten strávený čas to teda opravdu stojí. Krám vyreklamovat/vyhodit, koupit notebookový SATA disk a k tomu USB3 šuplík. Tyhle předražené odpadní křápy, které zhusta už ani nemají SATA konektor, takže po vykuchání jsou dobré akorát na elektroodpad, si kupuje fakt akorát neinformovaný zoufalec nebo BFU.