reklama

Tip na dobry ftpfs

Tip na dobry ftpfs
« kdy: 31. 08. 2010, 15:48:23 »
Zdravim,

chtel bych nejakou utilitku, ktera umi pripojit FTP jako ftpfs. Zkousel jsem "lufis", ale po chvili se s tim neda ani pracovat - je to hrozne pomale. Mate nejaky tip na spolehlivou a dobre zpracovanou utilitku?

reklama


Havis

Re: Tip na dobry ftpfs
« Odpověď #1 kdy: 31. 08. 2010, 16:20:58 »
nebude rozumnejsie pouzit sshfs? ;)

Re: Tip na dobry ftpfs
« Odpověď #2 kdy: 31. 08. 2010, 16:34:32 »
Havis: Bylo, ale na server mam pristup pouze pres FTP.

Re: Tip na dobry ftpfs
« Odpověď #3 kdy: 31. 08. 2010, 16:42:16 »
Jdu jeste zkusit curlftpfs, zda se, lufis je starsi utilitka...

Re: Tip na dobry ftpfs
« Odpověď #4 kdy: 31. 08. 2010, 17:59:57 »
Hmm, porad stejne na nic...

reklama


.

Re: Tip na dobry ftpfs
« Odpověď #5 kdy: 01. 09. 2010, 16:24:53 »
nemuze byt problem napriklad s firewallem na ceste a pripadne v modu ftp? (active/pasive)...

Re: Tip na dobry ftpfs
« Odpověď #6 kdy: 01. 09. 2010, 18:28:59 »
Bezelo to sice v pasivu, ale po zmene se to nejak vyrazne nezlepsilo. Otevirani a ukladani souboru trva cca 5s, coz je dost, kdyz kazdou chvili aktualizujete obsah souboru.

Zrusil jsem docasne vsechny pravidla ve firewallu, vlozil modul do jadra pro podporu FTP prenosu a upravil firewall.
Kód: [Vybrat]
Gentoo ~ # lsmod | grep ftp
nf_conntrack_ftp        5972  0
nf_conntrack           54717  7 xt_helper,nf_conntrack_ftp,nf_conntrack_ipv4,xt_state,xt_conntrack,xt_connmark,xt_CONNMARK

Gentoo ~ # iptables -S
-P INPUT ACCEPT
-P FORWARD ACCEPT
-P OUTPUT ACCEPT
-A INPUT -m helper --helper "ftp" -j ACCEPT

Soubor zde nelze vlozit, tak sem vlozim cely vypis. Prijde mi, ze je v nem zbytecne moc transakci (323)... (vstoupil jsem do slozky, otevrel/ulozil soubor a ukoncil spojeni).
Kód: [Vybrat]
< 220 ProFTPD 1.3.0 Server (hosting.domena2.cz) [178.72.xxx.xxx]

> USER username@domena.cz

< 331 Password required for username@domena.cz.

> PASS password

< 230 User username@domena.cz logged in.

> PWD

< 257 "/" is current directory.

> PORT 93,94,245,125,168,60

< 200 PORT command successful

> TYPE A

< 200 Type set to A

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> PORT 93,94,245,125,199,131

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> CWD /

< 250 CWD command successful

> CWD htdocs

< 250 CWD command successful

> PORT 93,94,245,125,169,116

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> CWD /

< 250 CWD command successful

> CWD htdocs

< 250 CWD command successful

> CWD administration

< 250 CWD command successful

> PORT 93,94,245,125,197,201

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> PORT 93,94,245,125,200,158

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> CWD /

< 250 CWD command successful

> PORT 93,94,245,125,220,118

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> CWD /

< 250 CWD command successful

> CWD htdocs

< 250 CWD command successful

> PORT 93,94,245,125,205,64

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> CWD /

< 250 CWD command successful

> CWD htdocs

< 250 CWD command successful

> CWD administration

< 250 CWD command successful

> PORT 93,94,245,125,188,104

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

ftpfs: operation ftpfs_getattr failed because No such file or directory
> PORT 93,94,245,125,207,162

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

ftpfs: operation ftpfs_getattr failed because No such file or directory
> PORT 93,94,245,125,211,34

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

ftpfs: operation ftpfs_getattr failed because No such file or directory
< 220 ProFTPD 1.3.0 Server (hosting.domena2.cz) [178.72.xxx.xxx]

> USER username@domena.cz

< 331 Password required for username@domena.cz.

> PASS password

< 230 User username@domena.cz logged in.

> PWD

< 257 "/" is current directory.

> CWD htdocs

< 250 CWD command successful

> CWD administration

< 250 CWD command successful

> PORT 93,94,245,125,223,193

< 200 PORT command successful

> TYPE I

< 200 Type set to I

> SIZE NewPassword.php

< 213 4291

> RETR NewPassword.php

< 150 Opening BINARY mode data connection for NewPassword.php (4291 bytes)

< 220 ProFTPD 1.3.0 Server (hosting.domena2.cz) [178.72.xxx.xxx]

> USER username@domena.cz

< 331 Password required for username@domena.cz.

> PASS password

< 230 User username@domena.cz logged in.

> PWD

< 257 "/" is current directory.

> CWD htdocs

< 250 CWD command successful

> CWD administration

< 250 CWD command successful

> PORT 93,94,245,125,196,204

< 200 PORT command successful

> TYPE A

< 200 Type set to A

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

ftpfs: operation ftpfs_getattr failed because No such file or directory
ftpfs: operation ftpfs_open failed because Operation not supported
ftpfs: operation ftpfs_open failed because Operation not supported
< 220 ProFTPD 1.3.0 Server (hosting.domena2.cz) [178.72.xxx.xxx]

> USER username@domena.cz

< 331 Password required for username@domena.cz.

> PASS password

< 230 User username@domena.cz logged in.

> PWD

< 257 "/" is current directory.

> CWD htdocs

< 250 CWD command successful

> CWD administration

< 250 CWD command successful

> PORT 93,94,245,125,155,162

< 200 PORT command successful

> TYPE I

< 200 Type set to I

> SIZE NewPassword.php

< 213 4291

> RETR NewPassword.php

< 150 Opening BINARY mode data connection for NewPassword.php (4291 bytes)

< 226 Transfer complete.

< 220 ProFTPD 1.3.0 Server (hosting.domena2.cz) [178.72.xxx.xxx]

> USER username@domena.cz

< 331 Password required for username@domena.cz.

> PASS password

< 230 User username@domena.cz logged in.

> PWD

< 257 "/" is current directory.

> PORT 93,94,245,125,155,105

< 200 PORT command successful

> TYPE A

< 200 Type set to A

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> CWD /

< 250 CWD command successful

> CWD htdocs

< 250 CWD command successful

> PORT 93,94,245,125,181,29

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> CWD /

< 250 CWD command successful

> CWD htdocs

< 250 CWD command successful

> CWD administration

< 250 CWD command successful

> PORT 93,94,245,125,222,237

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> PORT 93,94,245,125,148,141

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

ftpfs: operation ftpfs_getattr failed because No such file or directory
> PORT 93,94,245,125,219,142

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

ftpfs: operation ftpfs_getattr failed because No such file or directory
< 220 ProFTPD 1.3.0 Server (hosting.domena2.cz) [178.72.xxx.xxx]

> USER username@domena.cz

< 331 Password required for username@domena.cz.

> PASS password

< 230 User username@domena.cz logged in.

> PWD

< 257 "/" is current directory.

> CWD htdocs

< 250 CWD command successful

> CWD administration

< 250 CWD command successful

> PORT 93,94,245,125,226,139

< 200 PORT command successful

> TYPE I

< 200 Type set to I

> STOR 4913

< 150 Opening BINARY mode data connection for 4913

> SITE CHMOD 644 4913

< 200 SITE CHMOD command successful

> PORT 93,94,245,125,210,151

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> SITE CHUID 0 4913

< 500 'SITE CHUID' not understood

ftpfs: operation ftpfs_chown failed because Operation not permitted
< 226 Transfer complete.

> QUIT

< 221 Goodbye.

> PORT 93,94,245,125,194,106

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> DELE 4913

< 250 DELE command successful

> PORT 93,94,245,125,180,141

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

ftpfs: operation ftpfs_getattr failed because No such file or directory
> CWD /

< 250 CWD command successful

> RNFR htdocs/administration/NewPassword.php

< 350 File or directory exists, ready for destination name.

> RNTO htdocs/administration/NewPassword.php~

< 250 Rename successful

> CWD /

< 250 CWD command successful

> CWD htdocs

< 250 CWD command successful

> CWD administration

< 250 CWD command successful

> PORT 93,94,245,125,142,251

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

ftpfs: operation ftpfs_getattr failed because No such file or directory
< 220 ProFTPD 1.3.0 Server (hosting.domena2.cz) [178.72.xxx.xxx]

> USER username@domena.cz

< 331 Password required for username@domena.cz.

> PASS password

< 230 User username@domena.cz logged in.

> PWD

< 257 "/" is current directory.

> CWD htdocs

< 250 CWD command successful

> CWD administration

< 250 CWD command successful

> PORT 93,94,245,125,130,187

< 200 PORT command successful

> TYPE I

< 200 Type set to I

> STOR NewPassword.php

< 150 Opening BINARY mode data connection for NewPassword.php

> SITE CHMOD 644 NewPassword.php

< 200 SITE CHMOD command successful

> PORT 93,94,245,125,183,85

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

< 226 Transfer complete.

> QUIT

< 221 Goodbye.

> PORT 93,94,245,125,152,73

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> SITE CHMOD 644 NewPassword.php

< 200 SITE CHMOD command successful

> PORT 93,94,245,125,149,212

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> CWD /

< 250 CWD command successful

> PORT 93,94,245,125,224,10

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> CWD /

< 250 CWD command successful

> CWD htdocs

< 250 CWD command successful

> PORT 93,94,245,125,180,107

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> CWD /

< 250 CWD command successful

> CWD htdocs

< 250 CWD command successful

> CWD administration

< 250 CWD command successful

> DELE NewPassword.php~

< 250 DELE command successful

> CWD /

< 250 CWD command successful

> PORT 93,94,245,125,235,35

< 200 PORT command successful

> LIST -a

< 150 Opening ASCII mode data connection for file list

< 226 Transfer complete.

> QUIT

< 221 Goodbye.

Kit

Re: Tip na dobry ftpfs
« Odpověď #7 kdy: 01. 09. 2010, 18:48:27 »
Vypadá to, že ProFTPD 1.3.0 nerozumí hromadě požadavků klienta a ten se snaží vydolovat data za každou cenu. Samozřejmě to přináší zdržení.

Pro komunikaci s FTP serverem používám postup:
Kód: [Vybrat]
echo "PUT soubor" | ftp user@ftp.server.czTento příkaz dávám do Makefile. Stačí mi pak jen "make put" nebo třeba jen "make". Je to rychlé a praktické.

 

reklama