Cisco 7911g - zaseknute u Registering

[Tomas Srna]

Ahoj

Mam problem s Cisco 7911g telefonom, cez tftp sa nahra konfigurak, v menu vidim nahranu konfiguraciu, ale nechce sa pripojit na SIP server Asterisk. Na asterisku bezi TCP aj UDP.

Napriek spravnej konfiguracii ale telefon pise "Registering..." a z tohto stavu sa nikdy nedostane.

Neviete kde by mohol byt problem?

Dakujem

Tomas Srna

[Reklama]

[P]

sniffni si komunikaci mezi IP telefonem a asteriskem..

[gyterpena]

Mozno blba otazka, ale mas tam SIP firmware? Standartne je tam SCCP. Ak hej tak si nastav span na PC port a urob data sniff(alebo na asterisk servri ak mozes).

[P]

prave "Registering.." by melo znacit ze tam neni MGCP.. ale SIP

[gyterpena]

MGCP sa pouziva medzi CUCM(PBX) a voice gateway nie medzi telefonom a PBX (v cisco svete) SCCP/SIP je len rozdielny signaling bud na porte 2000 pre SCCP alebo 5060 sip. Aj 7911 so SCCP firmwarom bude  ukazovat registering ked sa z nejakeho dovodu(DNS) nevie pripojit na PBX.

[Reklama]

[HS]

Před několika lety jsem s tím také bojoval, telefon si stáhl konfiguraci, ale nechtěl se registrovat. Bylo to tou konfigurací... Stačila malá změna zdánlivě nevinného parametru a... Telefon se buď registroval a nebo naopak odmítal registrovat. Několikadenní laborací jsme našli funkční konfiguraci na které telefony jedou dodnes.
Spousta informací je na http://www.voip-info.org/ - hledej "Asterisk 7911"

[gyterpena]

Tak som si to skusil sam. Ked som pouzil hociaky firmware z 9. rady tak sa telefon any nesnazil zaregistrovat. Ked som pouzil 8.5.4 tak to islo v pohode.

[gyterpena]

Tu je config pre 7945

<device>
   <fullConfig>true</fullConfig>
    <deviceProtocol>SIP</deviceProtocol>
    <sshUserId>admin</sshUserId>
    <sshPassword>cisco</sshPassword>
    <devicePool>
        <dateTimeSetting>
            <dateTemplate>D.M.Y</dateTemplate>
            <timeZone>Pacific Standard/Daylight Time</timeZone>
            <ntps>
                <ntp>
                    <name>{TBexternalIPaddress}</name>
                    <ntpMode>Unicast</ntpMode>
                </ntp>
            </ntps>
        </dateTimeSetting>
        <callManagerGroup>
            <tftpDefault>true</tftpDefault>
            <members>
                <member priority="0">
                    <callManager>
                        <ports>
                            <ethernetPhonePort>2000</ethernetPhonePort>
                            <sipPort>5060</sipPort>
                            <securedSipPort>5061</securedSipPort>
                        </ports>
                        <processNodeName>172.16.101.62</processNodeName>
                    </callManager>
                </member>
            </members>
        </callManagerGroup>
    </devicePool>
    <commonProfile>
        <phonePassword></phonePassword>
        <backgroundImageAccess>true</backgroundImageAccess>
        <callLogBlfEnabled>0</callLogBlfEnabled>
    </commonProfile>
    <loadInformation>SIP45.8-5-4S</loadInformation>
    <vendorConfig>
        <disableSpeaker>false</disableSpeaker>
        <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
        <pcPort>0</pcPort>
        <settingsAccess>1</settingsAccess>
        <garp>0</garp>
        <voiceVlanAccess>0</voiceVlanAccess>
        <videoCapability>0</videoCapability>
        <autoSelectLineEnable>0</autoSelectLineEnable>
        <daysDisplayNotActive>1,7</daysDisplayNotActive>
        <displayOnTime>10:30</displayOnTime>
        <displayOnDuration>06:05</displayOnDuration>
        <displayIdleTimeout>00:05</displayIdleTimeout>
        <webAccess>1</webAccess>
        <spanToPCPort>1</spanToPCPort>
        <loggingDisplay>1</loggingDisplay>
        <loadServer></loadServer>
    </vendorConfig>
    <userLocale>
        <name>English_United_States</name>
        <uid>1</uid>
        <langCode>en_US</langCode>
        <version>1.0.0.0-1</version>
        <winCharSet>iso-8859-1</winCharSet>
    </userLocale>
    <networkLocale>United_States</networkLocale>
    <networkLocaleInfo>
        <name>United_States</name>
        <uid>64</uid>
        <version>1.0.0.0-1</version>
    </networkLocaleInfo>
    <deviceSecurityMode>1</deviceSecurityMode>
    <authenticationURL>http://{TBexternalIPaddress}/xmlservices/authentication.php</authenticationURL>
    <directoryURL>http://{TBexternalIPaddress}/xmlservices/PhoneDirectory.php</directoryURL>
    <idleTimeout>0</idleTimeout>
    <idleURL></idleURL>
    <informationURL>http://{TBexternalIPaddress}/xmlservices/index.php</informationURL>
    <messagesURL></messagesURL>
    <proxyServerURL></proxyServerURL>
    <servicesURL>http://{TBexternalIPaddress}/xmlservices/index.php</servicesURL>
    <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
    <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
    <dscpForCm2Dvce>96</dscpForCm2Dvce>
    <transportLayerProtocol>4</transportLayerProtocol>
    <capfAuthMode>0</capfAuthMode>
    <capfList>
        <capf>
            <phonePort>3804</phonePort>
        </capf>
    </capfList>
    <certHash></certHash>
    <encrConfig>false</encrConfig>
    <sipProfile>
        <sipProxies>
            <backupProxy>172.16.101.62</backupProxy>
            <backupProxyPort>5060</backupProxyPort>
            <emergencyProxy></emergencyProxy>
            <emergencyProxyPort></emergencyProxyPort>
            <outboundProxy></outboundProxy>
            <outboundProxyPort></outboundProxyPort>
            <registerWithProxy>true</registerWithProxy>
        </sipProxies>
        <sipCallFeatures>
            <cnfJoinEnabled>true</cnfJoinEnabled>
            <callForwardURI>x--serviceuri-cfwdall</callForwardURI>
            <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
            <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
            <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
            <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
            <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
            <rfc2543Hold>true</rfc2543Hold>
            <callHoldRingback>2</callHoldRingback>
            <localCfwdEnable>true</localCfwdEnable>
            <semiAttendedTransfer>true</semiAttendedTransfer>
            <anonymousCallBlock>2</anonymousCallBlock>
            <callerIdBlocking>0</callerIdBlocking>
            <dndControl>0</dndControl>
            <remoteCcEnable>true</remoteCcEnable>
        </sipCallFeatures>
        <sipStack>
            <sipInviteRetx>6</sipInviteRetx>
            <sipRetx>10</sipRetx>
            <timerInviteExpires>180</timerInviteExpires>
            <timerRegisterExpires>3600</timerRegisterExpires>
            <timerRegisterDelta>5</timerRegisterDelta>
            <timerKeepAliveExpires>120</timerKeepAliveExpires>
            <timerSubscribeExpires>120</timerSubscribeExpires>
            <timerSubscribeDelta>5</timerSubscribeDelta>
            <timerT1>500</timerT1>
            <timerT2>4000</timerT2>
            <maxRedirects>70</maxRedirects>
            <remotePartyID>false</remotePartyID>
            <userInfo>None</userInfo>
        </sipStack>
        <autoAnswerTimer>1</autoAnswerTimer>
        <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
        <autoAnswerOverride>true</autoAnswerOverride>
        <transferOnhookEnabled>true</transferOnhookEnabled>
        <enableVad>false</enableVad>
        <preferredCodec>g711u</preferredCodec>
        <dtmfAvtPayload>101</dtmfAvtPayload>
        <dtmfDbLevel>3</dtmfDbLevel>
        <dtmfOutofBand>avt</dtmfOutofBand>
        <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
        <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
        <kpml>3</kpml>
        <stutterMsgWaiting>1</stutterMsgWaiting>
        <callStats>false</callStats>
        <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
        <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
        <startMediaPort>16384</startMediaPort>
        <stopMediaPort>32766</stopMediaPort>
        <voipControlPort>5060</voipControlPort>
        <dscpForAudio>184</dscpForAudio>
        <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
        <dialTemplate>dialplan.xml</dialTemplate>
        <phoneLabel>Asterisk 6000</phoneLabel>
        <natEnabled>true</natEnabled>
        <sipLines>
            <line button="1">
                <featureID>9</featureID>
                <featureLabel>6000</featureLabel>
                <name>6000</name>
                <displayName>6000</displayName>
                <contact>6000</contact>
                <proxy>172.16.101.62</proxy>
                <port>5060</port>
                <autoAnswer>
                    <autoAnswerEnabled>2</autoAnswerEnabled>
                </autoAnswer>
                <callWaiting>3</callWaiting>
                <authName>6000</authName>
                <authPassword>1234</authPassword>
                <sharedLine>false</sharedLine>
                <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
                <messagesNumber>8888</messagesNumber>
                <ringSettingIdle>4</ringSettingIdle>
                <ringSettingActive>5</ringSettingActive>
                <forwardCallInfoDisplay>
                    <callerName>true</callerName>
                    <callerNumber>false</callerNumber>
                    <redirectedNumber>false</redirectedNumber>
                    <dialedNumber>true</dialedNumber>
                </forwardCallInfoDisplay>
            </line>
            <line button="2">
                <featureID>9</featureID>
                <featureLabel>6001</featureLabel>
                <name>6001</name>
                <displayName>6001</displayName>
                <contact>6001</contact>
                <proxy>172.16.101.62</proxy>
                <port>5060</port>
                <autoAnswer>
                    <autoAnswerEnabled>2</autoAnswerEnabled>
                </autoAnswer>
                <callWaiting>3</callWaiting>
                <authName>6001</authName>
                <authPassword>1234</authPassword>
                <sharedLine>false</sharedLine>
                <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
                <messagesNumber>8888</messagesNumber>
                <ringSettingIdle>4</ringSettingIdle>
                <ringSettingActive>5</ringSettingActive>
                <forwardCallInfoDisplay>
                    <callerName>true</callerName>
                    <callerNumber>false</callerNumber>
                    <redirectedNumber>false</redirectedNumber>
                    <dialedNumber>true</dialedNumber>
                </forwardCallInfoDisplay>
            </line>
        </sipLines>
    </sipProfile>

</device>

[Tomas Srna]

Skusal som ten configurak, ale pise mi UNPROVISIONED po jeho nahrati.

Dalej: Mate niekto konkretnu skusenost presne s 7911tkou? Mne kamarat znaly tychto telefonov povedal, ze maju nejaky "osekany" SIP protokol, vraj aby motivovali ludi si tam dat CallManager. Neviete o tom nieco?

[xul]

byla chyba pořizovat cisco telefon, protože ten je určen pro provoz s callmanagenerem!