Nefunkční síťovka r8168 v Ubuntu 22.04 LTS

[Maxximus999]

Zdravim, mam resp. mal som funkcny server so spustenymi sluzbami apache2 s niekolkymi domenami na testovanie,mailovy server SMTP postfix, dovecot IMAP a POP3 beziaci pre dve domeny, Media server Jellyfin spusteny cez jednu zo subdomen, Nextcloud taktiez cez jednu zo subdomen a postupne som odstranoval chyby aby bezali sluzby v pohode. NAT Forwarding som mal nastaveny na statiscku vnutornu IP na vsetky potrebne dostupne porty pre fungovanie danych sluzieb. FTP fungovalo vo WP bez problemov len vcera zrazu prestalo fungovat internetove pripojenie komplet na vsetkych LAN zariadeniach.
Siet je zapojena Opticky router od ISP TP-Link VR2100 zapojeny v rezime WIFI router-->SWITCH D-Link DGS-108 (tu je napojeny Moj server, 3x Android tv boxy a nasledujuci Switch-->SWITCH TP-Link TL-SG1005D / tu su napojene dalsia 2 PC a obcas aj 2 notebooky. Prakticky od D-Link switchu bolo vsetko bez internetu fungovala len Wifi. Tak som vsetko zaradom restartoval, na chvilu nabehol internet ale ked som zapol server zase vsetko skapalo. Myslel som si, ze odisiel D-Link Switch ale nie. Zapojil som Server na priame cez Lan port v routri myslim, ze nachvilu to nabehlo a potom zase nic. Ale internet uz ide aspon na ostatnych zariadeniach. Na serveri jednoducho nanacita IP, na routri som zrusil rezervaciu IP pre server ale ani DHCP mu adresu nedokaze pridelit. Ked nastavim pevnu IP adresu v NetworManager tak sa tvari, ze je pripojeny ale internet nejde. FW mam na serveri deaktivovany a internet ide len cez wifi. Skusal som hladat riesenie ale nic a seriem sa s tym uz par hodin. Mimochodom na inom zariadeni pripojenom na ten isty Lan kabel internet funguje.
Mam verejnu staticku IP, moze mi ISP blokovat nejak porty pripadne smerovanie na konkretnu MAC adresu? Lebo uz fakt neviem.
Eternet vyhadzuje stale chybu IP konfiguraciu nebola dostupna.

Prilozim aspon zatial co viem ak by niekto vedel o nejakom rieseni poskytnem aj dalsie info.

Kód: [Vybrat]

sudo lshw -C network
[sudo] password for marian:
  *-network                 
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: enp3s0
       version: 06
       serial: 10:bf:48:bc:60:b0
       size: 1Gbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=6.5.0-21-generic duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
       resources: irq:16 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff
  *-network
       description: Wireless interface
       physical id: 6
       bus info: usb@3:1
       logical name: wlx001333c721a6
       serial: 00:13:33:c7:21:a6
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=r8712u driverversion=6.5.0-21-generic ip=192.168.10.72 multicast=yes wireless=IEEE 802.11bgn


Kód: [Vybrat]

ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 10:bf:48:bc:60:b0 brd ff:ff:ff:ff:ff:ff
3: wlx001333c721a6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:13:33:c7:21:a6 brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.72/24 brd 192.168.10.255 scope global dynamic noprefixroute wlx001333c721a6
       valid_lft 83577sec preferred_lft 83577sec
    inet6 fe80::a50a:621d:9d95:7fcf/64 scope link noprefixroute
       valid_lft forever preferred_lft forever


Kód: [Vybrat]

netplan status --all
     Online state: online
    DNS Addresses: 127.0.0.53 (stub)
       DNS Search: .

●  1: lo ethernet UNKNOWN/UP (unmanaged)
      MAC Address: 00:00:00:00:00:00
        Addresses: 127.0.0.1/8
                   ::1/128
           Routes: ::1 metric 256

●  2: enp3s0 ethernet UP (unmanaged)
      MAC Address: 10:bf:48:bc:60:b0 (Realtek Semiconductor Co., Ltd.)

●  3: wlx001333c721a6 wifi UP (unmanaged)
      MAC Address: 00:13:33:c7:21:a6 (Realtek Semiconductor Corp.)
        Addresses: 192.168.10.72/24
                   fe80::a50a:621d:9d95:7fcf/64 (link)
    DNS Addresses: 192.168.10.1
           Routes: default via 192.168.10.1 metric 600 (dhcp)
                   169.254.0.0/16 metric 1000 (boot, link)
                   192.168.10.0/24 from 192.168.10.72 metric 600 (link)
                   fe80::/64 metric 1024


Kód: [Vybrat]

tarting Nmap 7.40 ( https://nmap.org ) at 2024-03-02 16:58 UTC
Nmap scan report for 0000000-xx.adsl.xxxxxxx-xx.xx (xxx.xxx.xxx.xxx)
Host is up (0.12s latency).
PORT     STATE    SERVICE
22/tcp   filtered ssh
23/tcp   filtered telnet
80/tcp   filtered http
110/tcp  filtered pop3
143/tcp  filtered imap
443/tcp  open     https
3389/tcp filtered ms-wbt-server

Nmap done: 1 IP address (1 host up) scanned in 2.81 seconds
Prosim o pomoc. Po nasmerovani NAT na druhu ip teda myslim na wifi kartu cez USB stranka funguje https://grejt.fun

[Reklama]

[Maxximus999]

Vyriesene!!! Zmenil som DNS v rozhrani routra na DNS ISP, preinstaloval ovladac dkms, v routri som vypol IPv6 aj ked doteraz to nevadilo a vytvoril som nove lan pripojenie. Tod vsetko asi.
Ale problem nastal vcera  avcera som aktualizoval cez automaticke aktualizacie akurat tzdata a po tejto aktualizacii nastali problemy ale dnes bola dalsia aktualizacia.

[Maxximus999]

Akoze funguje ale pri akejkolkvek instalacii nejakeho balika mi vyhadzuje toto.

1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up r8168-dkms (8.049.02-1ubuntu1.2) ...
Removing old r8168-8.049.02 DKMS files...
Deleting module r8168-8.049.02 completely from the DKMS tree.
Loading new r8168-8.049.02 DKMS files...
Building for 6.5.0-21-generic
Building initial module for 6.5.0-21-generic
ERROR: Cannot create report: [Errno 17] File exists: '/var/crash/r8168-dkms.0.crash'
Error! Bad return status for module build on kernel: 6.5.0-21-generic (x86_64)
Consult /var/lib/dkms/r8168/8.049.02/build/make.log for more information.
dpkg: error processing package r8168-dkms (--configure):
 installed r8168-dkms package post-installation script subprocess returned error exit status 10
Processing triggers for initramfs-tools (0.140ubuntu13.4) ...
update-initramfs: Generating /boot/initrd.img-6.5.0-21-generic
I: The initramfs will attempt to resume from /dev/dm-1
I: (/dev/mapper/vgkubuntu-swap_1)
I: Set the RESUME variable to override this.
Errors were encountered while processing:
 r8168-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)

a toto je crash sprava...

ProblemType: Package
DKMSBuildLog:
 DKMS make.log for r8168-8.049.02 for kernel 6.5.0-21-generic (x86_64)
 So  2. marec 2024, 19:53:17 CET
 make: Entering directory '/usr/src/linux-headers-6.5.0-21-generic'
 warning: the compiler differs from the one used to build the kernel
   The kernel was built by: x86_64-linux-gnu-gcc-12 (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0
   You are using:           gcc-12 (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0
   CC [M]  /var/lib/dkms/r8168/8.049.02/build/r8168_n.o
   CC [M]  /var/lib/dkms/r8168/8.049.02/build/r8168_asf.o
   CC [M]  /var/lib/dkms/r8168/8.049.02/build/rtl_eeprom.o
   CC [M]  /var/lib/dkms/r8168/8.049.02/build/rtltool.o
 In file included from ./include/linux/string.h:254,
                  from ./include/linux/bitmap.h:11,
                  from ./include/linux/cpumask.h:12,
                  from ./arch/x86/include/asm/paravirt.h:17,
                  from ./arch/x86/include/asm/cpuid.h:62,
                  from ./arch/x86/include/asm/processor.h:19,
                  from ./arch/x86/include/asm/timex.h:5,
                  from ./include/linux/timex.h:67,
                  from ./include/linux/time32.h:13,
                  from ./include/linux/time.h:60,
                  from ./include/linux/stat.h:19,
                  from ./include/linux/module.h:13,
                  from /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:43:
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c: In function ‘rtl8168_set_mac_address’:
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:24197:19: warning: passing argument 1 of ‘__builtin_memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
 24197 |         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
       |                ~~~^~~~~~~~~~
 ./include/linux/fortify-string.h:648:27: note: in definition of macro ‘__fortify_memcpy_chk’
   648 |         __underlying_##op(p, q, __fortify_size);                        \
       |                           ^
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:24197:9: note: in expansion of macro ‘memcpy’
 24197 |         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
       |         ^~~~~~
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:24197:19: note: expected ‘void *’ but argument is of type ‘const unsigned char *’
 24197 |         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
       |                ~~~^~~~~~~~~~
 ./include/linux/fortify-string.h:648:27: note: in definition of macro ‘__fortify_memcpy_chk’
   648 |         __underlying_##op(p, q, __fortify_size);                        \
       |                           ^
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:24197:9: note: in expansion of macro ‘memcpy’
 24197 |         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
       |         ^~~~~~
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:24199:32: warning: passing argument 2 of ‘rtl8168_rar_set’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
 24199 |         rtl8168_rar_set(tp, dev->dev_addr);
       |                             ~~~^~~~~~~~~~
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:575:59: note: expected ‘uint8_t *’ {aka ‘unsigned char *’} but argument is of type ‘const unsigned char *’
   575 | void rtl8168_rar_set(struct rtl8168_private *tp, uint8_t *addr);
       |                                                  ~~~~~~~~~^~~~
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c: In function ‘r8168_csum_workaround’:
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:27733:24: error: implicit declaration of function ‘skb_gso_segment’; did you mean ‘skb_gso_reset’? [-Werror=implicit-function-declaration]
 27733 |                 segs = skb_gso_segment(skb, features);
       |                        ^~~~~~~~~~~~~~~
       |                        skb_gso_reset
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:27733:22: warning: assignment to ‘struct sk_buff *’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
 27733 |                 segs = skb_gso_segment(skb, features);
       |                      ^
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c: In function ‘rtl8168_resume’:
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:28693:32: warning: passing argument 2 of ‘rtl8168_rar_set’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
 28693 |         rtl8168_rar_set(tp, dev->dev_addr);
       |                             ~~~^~~~~~~~~~
 /var/lib/dkms/r8168/8.049.02/build/r8168_n.c:24214:26: note: expected ‘uint8_t *’ {aka ‘unsigned char *’} but argument is of type ‘const unsigned char *’
 24214 |                 uint8_t *addr)
       |                 ~~~~~~~~~^~~~
 cc1: some warnings being treated as errors
 make[2]: *** [scripts/Makefile.build:251: /var/lib/dkms/r8168/8.049.02/build/r8168_n.o] Error 1
 make[1]: *** [/usr/src/linux-headers-6.5.0-21-generic/Makefile:2039: /var/lib/dkms/r8168/8.049.02/build] Error 2
 make: *** [Makefile:234: __sub-make] Error 2
 make: Leaving directory '/usr/src/linux-headers-6.5.0-21-generic'
DKMSKernelVersion: 6.5.0-21-generic
Date: Sat Mar  2 19:53:35 2024
DuplicateSignature: dkms:r8168-dkms:8.049.02-1ubuntu1.2:/var/lib/dkms/r8168/8.049.02/build/r8168_n.c:27733:24: error: implicit declaration of function ‘skb_gso_segment’; did you mean ‘skb_gso_reset’? [-Werror=implicit-function-declaration]
Package: r8168-dkms 8.049.02-1ubuntu1.2
PackageVersion: 8.049.02-1ubuntu1.2
SourcePackage: r8168
Title: r8168-dkms 8.049.02-1ubuntu1.2: r8168 kernel module failed to build

Co s tym vie niekto poradit???

[Jan Fikar]

No v prvním výpisu je pro síťovku driver=r8169 a pak se kompiluje neúspěšně modul r8168

Asi oddělat ten r8168?

https://devicetests.com/ubuntu-network-driver-guide

[Maxximus999]

No v prvním výpisu je pro síťovku driver=r8169 a pak se kompiluje neúspěšně modul r8168

Asi oddělat ten r8168?

https://devicetests.com/ubuntu-network-driver-guide

Dakujem ale nepomohlo to tak som hladal dalej. Skusil som, mozno sa to takto nema ale zatial to fičíííí.

Stále mi to vyhadzovalo toto a bol som z toho nervozny.

dkms status
r8168/8.049.02: added
r8168/8.052.01, 6.5.0-18-generic, x86_64: installed
r8168/8.052.01, 6.5.0-21-generic, x86_64: installed

Ale pri instalacii balikov este aj toto...

1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up r8168-dkms (8.049.02-1ubuntu1.2) ...
Removing old r8168-8.049.02 DKMS files...
Deleting module r8168-8.049.02 completely from the DKMS tree.
Loading new r8168-8.049.02 DKMS files...
Building for 6.5.0-21-generic
Building initial module for 6.5.0-21-generic
ERROR: Cannot create report: [Errno 17] File exists: '/var/crash/r8168-dkms.0.crash'
Error! Bad return status for module build on kernel: 6.5.0-21-generic (x86_64)
Consult /var/lib/dkms/r8168/8.049.02/build/make.log for more information.
dpkg: error processing package r8168-dkms (--configure):
 installed r8168-dkms package post-installation script subprocess returned error exit status 10
Processing triggers for initramfs-tools (0.140ubuntu13.4) ...
update-initramfs: Generating /boot/initrd.img-6.5.0-21-generic
I: The initramfs will attempt to resume from /dev/dm-1
I: (/dev/mapper/vgkubuntu-swap_1)
I: Set the RESUME variable to override this.
Errors were encountered while processing:
 r8168-dkms
E: Sub-process /usr/bin/dpkg returned an error

Tu https://askubuntu.com/questions/1502641/realtek-8168-chip-driver-fails-to-compile-a-valid-driver-on-kernel-6-5-0-15-gene som nasiel jedno z mne asi naj rozumnejsich rieseni ale celkom mi to nefungovalo, kedze som nedokazal odstrani predchadzajucu verziu drivera cize r8168/8.049.02 mal som nainstalovanu novsiu verziu drivera ale stara nie a nie aby sa odpratala. Myslim, ze vyvolavala aj crash ako je uvedene vyssie v crash logu. Ked som lepsie prezrel vsetky prispevky na tejto stranke nasiel som jeden zaujimavy skript, kedze system mam naklonovany cez CloneZillu aj vcera som ho takto obnovoval tak som to riskol a pouzil ho.
Tu je https://pastebin.ubuntu.com/p/QXcDXXDrps/
Mal by preinsatlovat ethernetovy ovladac ale nepreinstaloval iba mi vicistil pole. Novy driver nebol nainstalovany iba "prednastaveny".

dkms status
r8168/8.052.01: added

Tak som postupoval takto.../aj s vysledkami/

Vytvorte nový súbor dkms.conf pre ovládač.

sudo nano /usr/src/r8168-8.052.01/dkms.conf

a teraz do súboru pridajte nasledujúci obsah.

PACKAGE_NAME="r8168"
PACKAGE_VERSION="8.052.01"
BUILT_MODULE_NAME[0]="$PACKAGE_NAME"
DEST_MODULE_LOCATION[0]="/updates/dkms"
AUTOINSTALL="YES"
REMAKE_INITRD="YES"

Uložte súbor a spustite ďalšie riadky na zostavenie a inštaláciu ovládača.

sudo dkms add r8168/8.052.01
sudo dkms build r8168/8.052.01 -k 6.5.0-14-generic
sudo dkms install r8168/8.052.01 -k 6.5.0-14-generic

sudo dkms build r8168/8.052.01 -k 6.5.0-21-generic

Kernel preparation unnecessary for this kernel. Skipping...

Building module:
cleaning build area...
make -j4 KERNELRELEASE=6.5.0-21-generic -C /lib/modules/6.5.0-21-generic/build M=/var/lib/dkms/r8168/8.052.01/build.........
Signing module:
 - /var/lib/dkms/r8168/8.052.01/6.5.0-21-generic/x86_64/module/r8168.ko
EFI variables are not supported on this system
/sys/firmware/efi/efivars not found, aborting.
cleaning build area...

sudo dkms install r8168/8.052.01 -k 6.5.0-21-generic

r8168.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/6.5.0-21-generic/updates/dkms/

depmod....

Backing up initrd.img-6.5.0-21-generic to /boot/initrd.img-6.5.0-21-generic.old-dkms
Making new initrd.img-6.5.0-21-generic
(If next boot fails, revert to initrd.img-6.5.0-21-generic.old-dkms image)
update-initramfs........

dkms status
r8168/8.052.01, 6.5.0-21-generic, x86_64: installed

reboot

Ale tu to nekonci. Po nabehnuti systemu to nefungovalo tak v NetworkManeger som odstranil rozhranie a vytvoril nove eternetove rozhranie. Mozno bolo treba trochu pockat a aktivovalo by sa aj to povodne. Naviem spravil som ako som spravil.
Zatial to ide. SIce pri instalacii balickov mi to vyhadzuje stale...

Processing triggers for hicolor-icon-theme (0.17-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.6) ...
Processing triggers for man-db (2.10.2-1) ...
Processing triggers for menu (2.1.47ubuntu4) ...
Processing triggers for mailcap (3.70+nmu1ubuntu1) ...
Processing triggers for desktop-file-utils (0.26-1ubuntu3) ...
Processing triggers for initramfs-tools (0.140ubuntu13.4) ...
update-initramfs: Generating /boot/initrd.img-6.5.0-21-generic
I: The initramfs will attempt to resume from /dev/dm-1
I: (/dev/mapper/vgkubuntu-swap_1)
I: Set the RESUME variable to override this.

Neviem do akej miery je velky tento problem ale novy crash report nie je iba ten zo vcera.

[Reklama]

[Maxximus999]

Tak este k tomu eternetu neviem ci ma router nejaky blacklist ale s povodnou MAC mi to blokuje pripojenie resp. dlho nacitava nastavenia siete a nakoniec nepripoji tak musim v NetworkManager nastavit klonovanu MAC adresu. Staticku Lan adresu neviem v NM nastavit priamo v PC lebo ma to nepripoji asi tym,ze je zapnuty DHCP na routri ale ked som skusal Ubuntu Server tak hned pri instalacii sla nastavit staticka IP a ficalo to bez rezervacie v routri.

Inac vcelku fajn monolog.

Dodatok takze v routri mam zapnuty FW a DosProtection a ako IP tak aj MAC adresa boli v zozname blokovanych hostitelov.

[Rovano _]

Proč se tam kompiloval ovladač?
Nějak jsem to celé nepobral.

Ovladač se přepíná pomocí balíků. Pokud je to třeba. Tato síťovka funguje odjakživa.

Momentálně s ní jedu na tom R8169. Ale používal jsem i ten druhý.

[Maxximus999]

No ked som tam nainstaloval cez dkms tak mi tam nahodilo len verziu

r8168/8.049.02

a ta mi nesla. Server mam v prevadzke asai mesiac aj preinstalaciami, teraz je pomerne stabilny a bezia tam ako som spominal viacere sluzby zatial iba v teste. V jeden den, myslim v stredu cez den mi to padlo a neslo pripojit cez eternet. skusal som hocico a neslo to hladal som po forach a skusal ale nic. Nepomohla ani preinstalacia teda nanovo nainstalovany system a sietovka nic. Neviem co sa stalo ale zatial to funguje.

[Jan Fikar]

Tak přes dkms se dává jen r8168, ten ovladač r8169 vůbec dkms nepotřebuje, je prostě v jádře. Tím pádem je to jednodušší a preferovaný ovladač. Prostě oddělejte ten r8168 z dkms a jeďte na r8169 z jádra.

Kód: [Vybrat]

sudo apt-get purge r8168-dkms
a hotovo

pokud tedy není modul r8169 blacklistovanej, potom ještě zrušit blacklist

[Maxximus999]

!!! Dávam to sem iba preto ak by mal niekto podobný problém !!!

Vsetko bolo zbytocne lebo vsetko bolo funkcne akurat ako pako som objednal Android box samozrejme cez Aliho presne tento https://www.aliexpress.com/item/1005005979031456.html?spm=a2g0o.order_list.order_list_main.12.6ff518024QMgS9.
Doma pouzivame uz 2 anroid boxy tiez od aliho ale iny typ H96 4K a funguju bez problemov.
Tento sakramentsky hajzlik mi do par minut totalne blokol celu siet LAN a aj Wifi. Ked som to vsetko restartoval zaradom tak to na chvilu nabehlo a po par minutach zase nic. Potom som isiel vylucovacou metodou a odpajal resp menil zariadenia az kym to nenabehlo natrvalo.
Ale stale som si myslel, ze to bol len omyl. Vcera som ho znova napojil do LAN a do par minut padla cela siet. Mam aj LOG z routra ale ja z toho nevyjdem nie som velky odbornik. Tu je cast logu IP a MAC su zmenene zamerne.

Kód: [Vybrat]

Mar 11 12:20:24 kernel: [500717.450000] wlan1: Open and authenticated
Mar 11 12:20:24 dnsmasq-dhcp[1999]: DHCPDISCOVER(br0) 000000000000
Mar 11 12:20:24 dnsmasq-dhcp[1999]: DHCPOFFER(br0) 1.1.1.1 00.00.00.00.00.00
Mar 11 12:20:25 dnsmasq-dhcp[1999]: DHCPREQUEST(br0) 1.1.1.1 XX:XX:XX:XX:XX
Mar 11 12:20:25 dnsmasq-dhcp[1999]: DHCPACK(br0) 1.1.1.1 XX:XX:XX:XX:XX
Mar 11 12:20:42 kernel: [500735.560000] wlan1: (WIFINET) Deauth received from 06:f1:6b:61:2c:15 Reason: Leaving (or has left) IBSS or ESS[3]
Mar 11 12:20:42 kernel: [500735.560000] wlan1: A wireless client is deauthenticated - 06:F1:6B:61:2C:15
Mar 11 12:20:49 pppd[3549]: Timeout waiting for PADO packets
Mar 11 12:20:49 pppd[3549]: Unable to complete PPPoE Discovery
Mar 11 12:20:49 pppd[3549]: _send_event_to_daemon (from [3549]main.c:die[1256]) msg: [P046action:down;iface:ppp0;status:101;link:eth1_2;]
Mar 11 12:20:49 pppd[3549]: Exit, status: 101
Mar 11 12:20:49 stop_process_t[3577]: not found pid process 'igmpx'
Mar 11 12:20:58 stop_process_t[3577]: not found pid process 'igmpx'
Mar 11 12:21:00 pppd[3691]: Plugin /usr/lib/pppd/rp-pppoe.so loaded.
Mar 11 12:21:00 pppd[3691]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.4
Mar 11 12:21:00 pppd[3692]: entering dlock, dfd = -1
Mar 11 12:21:00 pppd[3692]: dlock: locked
Mar 11 12:21:00 pppd[3692]: pppd 2.4.4 started by admin, uid 0
Mar 11 12:21:05 pppd[3692]: _send_event_to_daemon (from [3692]discovery.c:waitForPADO[384]) msg: [P049action:trouble;iface:ppp0;status:101;link:eth1_2;]
Mar 11 12:21:35 pppd[3692]: Timeout waiting for PADO packets
Mar 11 12:21:35 pppd[3692]: Unable to complete PPPoE Discovery
Mar 11 12:21:35 pppd[3692]: _send_event_to_daemon (from [3692]main.c:die[1256]) msg: [P046action:down;iface:ppp0;status:101;link:eth1_2;]
Mar 11 12:21:35 pppd[3692]: Exit, status: 101
Mar 11 12:21:36 stop_process_t[3706]: not found pid process 'igmpx'
Mar 11 12:21:52 stop_process_t[3706]: not found pid process 'igmpx'
Mar 11 12:21:55 pppd[3819]: Plugin /usr/lib/pppd/rp-pppoe.so loaded.
Mar 11 12:21:55 pppd[3819]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.4
Mar 11 12:21:55 pppd[3821]: entering dlock, dfd = -1
Mar 11 12:21:55 pppd[3821]: dlock: locked
Mar 11 12:21:55 pppd[3821]: pppd 2.4.4 started by admin, uid 0
Jan  1 01:00:26 syslogd started: BusyBox v1.26.2
Jan  1 01:00:32 dnsmasq-dhcp[1074]: DHCPDISCOVER(br0) XX:XX:XX:XX:XX
Jan  1 01:00:32 dnsmasq-dhcp[1074]: DHCPOFFER(br0) 1.1.1.1 XX:XX:XX:XX:XX
Jan  1 01:00:33 ppp_is_up[1304]: ppp0 speed: 1000M Full