Zobrazit příspěvky

121

Software / Převod nrg2iso nefunguje

« kdy: 21. 09. 2012, 18:31:23 »

POkusam sa prekonvertovat nrg obraz do iso ale ked to prekonvertujem tak nie je mozne vysledny iso subor otvorit, skusal som viackrat... funguje vam niekomu?

dakujem

122

Sítě / Jaké porty používá ProFTPD?

« kdy: 21. 09. 2012, 18:30:05 »

Zdravim,
chcel som sa spytat ake porty vyuziva proftpd, kedze ho chcem prioritizovat na sieti...
Vyzera ze nie standardne 20,21... ale ze sa menia v roznom rozmedzi, je dobre nastavit staticky 20, 21 alebo sa to neodporuca?

123

Software / Návody nebo knihy o QoS

« kdy: 18. 09. 2012, 13:44:21 »

Zdravim, viete poradit nejake dobre materialy alebo knizky kde je jednoducho a pochopitelne aj pre zaciatocnika vysvetlena problematika QOS? hlavne orientovane na linuxove systemy....

124

Sítě / QoS s Mangle na RouterOS

« kdy: 16. 09. 2012, 22:57:27 »

Ahojte, snazim sa nejako rozumne rozbehat qos na routeros(mikrotik), len ako si sa mi nedari....takto zatial vyzera moj pocin s mangle, lenze po nahodeni su vysoke pingy a rychlost ide pomaly....viete niekto poradit kde je chyba? dakujem..:

Kód: [Vybrat]

add action=add-dst-to-address-list address-list=p2p-downloaders \
    address-list-timeout=5h chain=forward comment=\
    "Markovanie p2p-downloaderov" disabled=no in-interface=ether1 p2p=all-p2p \
    src-address-list=!p2p-downloaders
add action=add-src-to-address-list address-list=skype address-list-timeout=1h \
    chain=forward comment=skype disabled=no layer7-protocol=skypenack \
    packet-size=39 protocol=udp
add action=mark-connection chain=forward comment=p2p disabled=no \
    new-connection-mark=p2p_conn p2p=all-p2p passthrough=yes
add action=mark-connection chain=forward connection-mark=!p2p_conn disabled=\
    no layer7-protocol=bittorrent new-connection-mark=p2p_conn passthrough=\
    yes
add action=mark-connection chain=forward connection-mark=!p2p_conn disabled=\
    no layer7-protocol=bittorent2 new-connection-mark=p2p_conn passthrough=\
    yes
add action=mark-connection chain=forward connection-mark=!p2p_conn disabled=\
    no dst-address-list=p2p-downloaders new-connection-mark=p2p_conn \
    passthrough=yes port=10000-65535 protocol=udp
add action=mark-connection chain=forward connection-mark=!p2p_conn disabled=\
    no dst-address-list=p2p-downloaders new-connection-mark=p2p_conn \
    passthrough=yes port=10000-65535 protocol=tcp
add action=jump chain=forward connection-mark=p2p_conn disabled=no \
    jump-target=P2P
add action=mark-connection chain=forward comment=Games disabled=no \
    layer7-protocol=worldofwarcraft new-connection-mark=games_conn \
    passthrough=yes
add action=mark-connection chain=forward connection-mark=!games_conn \
    disabled=no layer7-protocol=counterstrike-source new-connection-mark=\
    games_conn passthrough=yes
add action=mark-connection chain=forward connection-mark=!games_conn \
    disabled=no new-connection-mark=games_conn passthrough=yes port=\
    27015-27020,27050,28959-28961 protocol=udp
add action=mark-connection chain=forward connection-mark=!games_conn \
    disabled=no new-connection-mark=games_conn passthrough=yes port=\
    55901,55919 protocol=tcp
add action=jump chain=forward connection-mark=games_conn disabled=no \
    jump-target=GAMES
add action=mark-connection chain=prerouting comment=download-servers \
    disabled=yes in-interface=ether1 new-connection-mark=\
    download-servers-in-conn passthrough=yes src-address-list=\
    download-servers
add action=mark-packet chain=prerouting connection-mark=\
    download-servers-in-conn disabled=yes new-packet-mark=download-servers \
    passthrough=no
add action=mark-connection chain=prerouting comment=linux disabled=yes \
    in-interface=ether1 new-connection-mark=Linux_conn passthrough=yes \
    src-address-list=Linux
add action=mark-packet chain=prerouting connection-mark=Linux_conn disabled=\
    yes new-packet-mark=Linux passthrough=no
add action=mark-connection chain=prerouting comment=Porn disabled=yes \
    in-interface=ether1 new-connection-mark=Porn_conn passthrough=yes \
    src-address-list=Porn
add action=mark-packet chain=prerouting connection-mark=Porn_conn disabled=\
    yes new-packet-mark=Porn passthrough=no
add action=mark-connection chain=prerouting comment=facebook_in disabled=yes \
    in-interface=ether1 new-connection-mark=facebook-in-conn passthrough=yes \
    src-address-list=facebook
add action=mark-packet chain=prerouting connection-mark=facebook-in-conn \
    disabled=yes new-packet-mark=facebook-in passthrough=no
add action=mark-connection chain=forward comment=ShareServers disabled=no \
    new-connection-mark=ShareServers_conn passthrough=yes src-address-list=\
    ShareServers
add action=mark-connection chain=forward connection-mark=!ShareServers_conn \
    disabled=no new-connection-mark=ShareServers_conn passthrough=yes \
    src-address-list=untitled
add action=jump chain=forward connection-mark=ShareServers_conn disabled=no \
    jump-target=SHARESERVERS
add action=mark-connection chain=forward comment=speedtests disabled=no \
    new-connection-mark=speedtests_conn passthrough=yes src-address-list=\
    speedtests
add action=jump chain=forward connection-mark=speedtests_conn disabled=no \
    jump-target=SPEEDTESTS
add action=mark-connection chain=forward comment=\
    "PRIOR(high priority services)" disabled=no new-connection-mark=\
    prior_conn passthrough=yes port=25,53,110 protocol=tcp
add action=mark-connection chain=forward disabled=no new-connection-mark=\
    prior_conn passthrough=yes protocol=icmp
add action=mark-connection chain=forward connection-mark=!prior_conn \
    disabled=no new-connection-mark=prior_conn passthrough=yes port=53 \
    protocol=udp
add action=jump chain=forward connection-mark=prior_conn disabled=no \
    jump-target=PRIOR
add action=mark-connection chain=forward comment=Video-net disabled=no \
    new-connection-mark=video_conn passthrough=yes src-address-list=video_net
add action=mark-connection chain=forward connection-mark=!video_conn \
    disabled=no new-connection-mark=video_conn passthrough=yes port=1935 \
    protocol=tcp
add action=mark-connection chain=forward disabled=no new-connection-mark=\
    video_conn passthrough=yes port=554 protocol=tcp
add action=jump chain=forward connection-mark=video_conn disabled=no \
    jump-target=VIDEO
add action=mark-connection chain=forward comment=VOIP disabled=no \
    layer7-protocol=skypetoskype new-connection-mark=voip_conn passthrough=\
    yes
add action=mark-connection chain=forward connection-mark=!voip_conn \
    connection-rate=0-50k disabled=no new-connection-mark=voip_conn \
    passthrough=yes protocol=udp src-address-list=skype
add action=mark-connection chain=forward connection-mark=!voip_conn disabled=\
    no layer7-protocol=sip new-connection-mark=voip_conn passthrough=yes
add action=mark-connection chain=forward connection-mark=!voip_conn disabled=\
    no layer7-protocol=skypeout new-connection-mark=voip_conn passthrough=no
add action=jump chain=forward connection-mark=voip_conn disabled=no \
    jump-target=VOIP
add action=mark-connection chain=forward comment=HTTP connection-mark=no-mark \
    disabled=no new-connection-mark=http_conn passthrough=yes port=26-443,80 \
    protocol=tcp
add action=jump chain=forward connection-mark=http_conn disabled=no \
    jump-target=HTTP
add action=mark-connection chain=forward comment=FTP disabled=no \
    new-connection-mark=ftp_conn passthrough=yes port=20-21 protocol=tcp
add action=jump chain=forward connection-mark=ftp_conn disabled=no \
    jump-target=FTP
add action=mark-connection chain=forward comment=INTERNET-OTHER \
    connection-mark=no-mark disabled=no new-connection-mark=\
    internet-other_conn passthrough=yes
add action=jump chain=forward connection-mark=internet-other_conn disabled=no \
    jump-target=INTERNET-OTHER
add action=mark-packet chain=P2P comment=P2P disabled=no in-interface=ether1 \
    new-packet-mark=p2p_in passthrough=yes
add action=mark-packet chain=P2P disabled=no new-packet-mark=p2p_out \
    out-interface=ether1 passthrough=yes
add action=mark-packet chain=GAMES comment=GAMES disabled=no in-interface=\
    ether1 new-packet-mark=games_in passthrough=yes
add action=mark-packet chain=GAMES disabled=no new-packet-mark=games_out \
    out-interface=ether1 passthrough=yes
add action=mark-packet chain=SHARESERVERS comment=SHARESERVERS disabled=no \
    in-interface=ether1 new-packet-mark=shareservers_in passthrough=no
add action=mark-packet chain=postrouting connection-mark=ShareServers_up_conn \
    disabled=yes new-packet-mark=Shareservers_up passthrough=no
add action=mark-packet chain=SPEEDTESTS comment=SPEEDTESTS disabled=no \
    in-interface=ether1 new-packet-mark=speedtests_in passthrough=no
add action=mark-packet chain=SPEEDTESTS disabled=no new-packet-mark=\
    speedtests_out out-interface=ether1 passthrough=no
add action=mark-packet chain=PRIOR comment="PRIOR(high priority services)" \
    disabled=no in-interface=ether1 new-packet-mark=prior_in passthrough=no
add action=mark-packet chain=PRIOR disabled=no new-packet-mark=prior_out \
    out-interface=ether1 passthrough=no
add action=mark-packet chain=VIDEO comment=VIDEO disabled=no in-interface=\
    ether1 new-packet-mark=video_in passthrough=no
add action=mark-packet chain=VIDEO disabled=no new-packet-mark=video_out \
    out-interface=ether1 passthrough=no
add action=mark-packet chain=VOIP comment=VOIP disabled=no in-interface=\
    ether1 new-packet-mark=voip_in passthrough=no
add action=mark-packet chain=VOIP disabled=no new-packet-mark=voip_out \
    out-interface=ether1 passthrough=no
add action=mark-packet chain=HTTP comment=HTTP disabled=no in-interface=\
    ether1 new-packet-mark=http_in passthrough=no
add action=mark-packet chain=HTTP disabled=no new-packet-mark=http_out \
    out-interface=ether1 passthrough=no
add action=mark-packet chain=FTP comment=FTP disabled=no in-interface=ether1 \
    new-packet-mark=ftp_in passthrough=no
add action=mark-packet chain=FTP disabled=no new-packet-mark=ftp_out \
    out-interface=ether1 passthrough=no
add action=mark-packet chain=INTERNET-OTHER comment=INTERNET-OTHER disabled=\
    no in-interface=ether1 new-packet-mark=internet-other_in passthrough=no
add action=mark-packet chain=INTERNET-OTHER disabled=no new-packet-mark=\
    internet-other_out out-interface=ether1 passthrough=no

125

Desktop / Podobné prostredie ako Fluxbox?

« kdy: 12. 09. 2012, 09:59:03 »

Zdravim, kedze mam velky problem rozbehat fluxbox na novom archlinuxe, tak by ma zaujimalo ci je nejaka vhonda nahrada.
Co by to malo robit: najlepsie ziadne menu, ikony na ploche. Spustanie aplikacii pomocou klavesovych skratok, minimalisticky, konfigurovanie klavesovych skratok.
Viete poradit?

126

Desktop / Instalace Fluxboxu na Arch Linux

« kdy: 11. 09. 2012, 23:41:45 »

S novou instalaciou archlinuxu sa mi objavuje mnozstvo problemov....teraz instalujem fluxbox pomocou tychto krokov:
http://rado3105.blogspot.sk/2012/09/install-graphical-enviroment-fluxbox.html

a na konci po zadani startx ako bezny user mi to hadze chyby:
xinit: connection to x server lost....

toto je vypis z logu xorg:

Citace

[ 14212.947] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 14212.947] (II) LoadModule: "fbdev"
[ 14212.947] (WW) Warning, couldn't open module fbdev
[ 14212.947] (II) UnloadModule: "fbdev"
[ 14212.947] (II) Unloading fbdev
[ 14212.947] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 14212.947] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+)
[ 14212.948] (--) using VT number 7

grafiku mam intel 915. Nainstalovane intel ovladace....

127

Distribuce / Error grub: no such device...

« kdy: 11. 09. 2012, 17:13:29 »

Rozpis mojich particii:

Kód: [Vybrat]

lrwxrwxrwx 1 root root 10 Sep 11 12:39 124dca57-5a6e-483b-8563-0d1f7b03b12c -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 11 12:40 606fbea0-2aaa-44d0-8677-e93f49004ffc -> ../../dm-2
lrwxrwxrwx 1 root root 10 Sep 11 12:39 87f92183-9031-44cd-bf6c-1046a636b127 -> ../../sda2
lrwxrwxrwx 1 root root 11 Sep 11 12:39 99fcc4b6-ea63-46ed-b740-472d28e50d35 -> ../../loop1
lrwxrwxrwx 1 root root 10 Sep 11 12:39 b5024c82-b015-4e4e-a1c2-0777f31d9ff1 -> ../../sda4
lrwxrwxrwx 1 root root 10 Sep 11 12:40 be601ccb-531f-4947-9988-67d855f83bfb -> ../../dm-1
lrwxrwxrwx 1 root root 10 Sep 11 12:39 ef0cbf1f-d46d-40ca-973f-bda3f1b4fa95 -> ../../sda1

sda1 je boot(ext2), sda2 - swap, sda3 (/, root, ext4)...

Ako je mozne to zmenit resp. upravit? dakuejm

128

Distribuce / Nový způsob instalace Archu

« kdy: 11. 09. 2012, 16:54:25 »

http://rado3105.blogspot.sk/2012/09/1.html

robil som si poznamky pocas instalacie, dvakrat som to instaloval nanovo a system nenabehne koli zlemu uuide disku v grube....vie niekto poradit ako zmenit grub2.cfg?
Popripade skontrolovat navod ci tam je vsetko dobre....

129

Server / Bind9 vs. Unbound

« kdy: 10. 09. 2012, 22:40:54 »

Co z tychto dvoch odporucate na siet ako hlavny dns server, s poctom uzivatelov okolo 150...?
Dakujem

130

Hardware / Harddisk: přežije nebo vyměnit?

« kdy: 22. 08. 2012, 12:53:07 »

Toto je vystup, zaujima ci uz disk treba vymenit alebo to este prezije alebo ako este nieco dotestovat?

smartctl -a /dev/sda smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital AV-GP family Device Model: WDC WD15EVDS-68V9B0 Serial Number: WD-WMAVU0931943 Firmware Version: 01.00A01 User Capacity: 1,500,300,828,160 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Aug 22 12:47:08 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (35700) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1700 3 Spin_Up_Time 0x0027 189 180 021 Pre-fail Always - 5508 4 Start_Stop_Count 0x0032 080 080 000 Old_age Always - 20552 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21616 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 080 080 000 Old_age Always - 20550 192 Power-Off_Retract_Count 0x0032 173 173 000 Old_age Always - 20541 193 Load_Cycle_Count 0x0032 156 156 000 Old_age Always - 132092 194 Temperature_Celsius 0x0022 115 103 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 199 199 000 Old_age Always - 330 198 Offline_Uncorrectable 0x0030 199 199 000 Old_age Offline - 255 199 UDMA_CRC_Error_Count 0x0032 200 199 000 Old_age Always - 4931 200 Multi_Zone_Error_Rate 0x0008 198 198 000 Old_age Offline - 410 SMART Error Log Version: 1 ATA Error Count: 699 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 699 occurred at disk power-on lifetime: 21615 hours (900 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 08 39 40 e3 Error: UNC at LBA = 0x03403908 = 54540552 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 ff 38 40 e3 08 14:06:15.378 READ DMA ec 00 00 00 00 00 a0 08 14:06:15.371 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 14:06:15.371 SET FEATURES [Set transfer mode] Error 698 occurred at disk power-on lifetime: 21615 hours (900 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 08 39 40 e3 Error: UNC at LBA = 0x03403908 = 54540552 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 ff 38 40 e3 08 14:06:12.690 READ DMA ec 00 00 00 00 00 a0 08 14:06:12.682 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 14:06:12.682 SET FEATURES [Set transfer mode] Error 697 occurred at disk power-on lifetime: 21615 hours (900 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 08 39 40 e3 Error: UNC at LBA = 0x03403908 = 54540552 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 ff 38 40 e3 08 14:06:10.017 READ DMA ec 00 00 00 00 00 a0 08 14:06:10.009 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 14:06:10.009 SET FEATURES [Set transfer mode] Error 696 occurred at disk power-on lifetime: 21615 hours (900 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 08 39 40 e3 Error: UNC at LBA = 0x03403908 = 54540552 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 ff 38 40 e3 08 14:06:07.344 READ DMA ec 00 00 00 00 00 a0 08 14:06:07.336 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 14:06:07.336 SET FEATURES [Set transfer mode] Error 695 occurred at disk power-on lifetime: 21615 hours (900 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 08 39 40 e3 Error: UNC at LBA = 0x03403908 = 54540552 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 ff 38 40 e3 08 14:06:04.671 READ DMA ec 00 00 00 00 00 a0 08 14:06:04.663 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 14:06:04.663 SET FEATURES [Set transfer mode] SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

131

Server / Kontrola disku až po naběhnutí systému

« kdy: 22. 08. 2012, 12:29:03 »

Mam debian squeeze server. Su tam dva disky, primarny-systemovy SSD. Druhy ako ulozisko. Chcel by som aby kontrola toho druheho disku neprebiehala pri restarte (3tb a trva dlho kym statrtne system) a ci je nejaka moznost az po nabehnuti systemu a potom po kontrole ak su chyby znova restartovat system. Dakujem...(momentalne to je nastavene v fstab ako defaults, 0 2)

132

Hardware / UPS s funkcí bezpečného vypnutí

« kdy: 22. 08. 2012, 12:25:47 »

Viete poradit nejaku ups, idealne nejaku kde by som si pripojil vlastnu bateriu(nejaky board ako ad155 s moznostou bezpecneho vypnutia servera). Spotreba servera 30W.
Dakujem.....

133

Hardware / Linux na mobile s Intel Atom

« kdy: 13. 08. 2012, 17:50:06 »

http://mobil.sme.sk/c/6495613/testovali-sme-prvy-smartfon-s-procesorom-intel-atom.html

neviete ci nie je nejaka moznost tam supnut gnu linux, kedze je tam x86, tak by tam malo bezat vacsina programov...len nevedno ako s ovladacmi....

134

Server / Btrfs na server?

« kdy: 07. 08. 2012, 14:13:10 »

Zdravim doteraz som pouzival Debiana squeeze s ext4, mam to na ssd disku, a casto koli vypadkom sa mi suborovy system pokazi...nejde opravit a treba preinstalovat. Rozmyslal som tam hodit btrfs, ma to vyznam alebo radsej ostat pri ext4. Je na Debian mozne pouzit btrfs?

135

Sítě / Postfix, doména a lokálna sieť

« kdy: 19. 07. 2012, 19:13:48 »

Zdravim na sieti mi nebezi nijaky dns server a potreboval by som vyuzivat sluzby mailoveho servera. Je potrebny aj dns server, ked chcem aby mi fungoval postfix?
Podla tohto manualu, je to hned v dalsich krokoch: http://wiki.debian.org/Postfix
a este nikdy predtym som neriesil dns ani mail na serveri.
Keby ma vedel niekto trosku nasmerovat bol by som velmi vdacny, dakujem.