Fórum Root.cz

Hlavní témata => Distribuce => Téma založeno: beer 29. 08. 2016, 09:32:37

Název: Asus Zenbook UX21E - zamrzá na baterii, xubuntu 16.04.1 x64, EFI instalace
Přispěvatel: beer 29. 08. 2016, 09:32:37

ahoj, dle


https://help.ubuntu.com/community/AsusZenbook#Kernel_parameters_to_use


a těch informací na začátku (intel_pstate=disable pcie_aspm=force acpi_osi='Windows 2009' acpi_os_name='Windows 2009' ) jsem zkombinoval parametry pro /etc/default/grub a nainstaloval tlp, nastavil dle návodu a stejně zamrzá. Bios poslední verze.


/etc/default/grub


Kód: [Vybrat]
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'


GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
#GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=1
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_pstate=disable pcie_aspm=force acpi_osi='Windows 2009' acpi_os_name='Windows 2009' drm.vblankoffdelay=1 i915.semaphores=1 rootfstype=ext4"
GRUB_CMDLINE_LINUX="intel_pstate=disable pcie_aspm=force acpi_osi='Windows 2009' acpi_os_name='Windows 2009' drm.vblankoffdelay=1 i915.semaphores=1 rootfstype=ext4"


# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"


# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console


# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480


# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true


# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"


# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"


 /etc/default/tlp
Kód: [Vybrat]
# ------------------------------------------------------------------------------
# tlp - Parameters for power save
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html


# Hint: some features are disabled by default, remove the leading # to enable
# them.


# Set to 0 to disable, 1 to enable TLP.
TLP_ENABLE=1


# Operation mode when no power supply can be detected: AC, BAT
# Concerns some desktop and embedded hardware only.
TLP_DEFAULT_MODE=AC


# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2


# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60


# Hint: CPU parameters below are disabled by default, remove the leading #
# to enable them, otherwise kernel default values are used.


# Select a CPU frequency scaling governor.
# Intel Core i processor with intel_pstate driver:
#   powersave(*), performance
# Older hardware with acpi-cpufreq driver:
#   ondemand(*), powersave, performance, conservative
# (*) is recommended.
# Hint: use tlp-stat -p to show the active driver and available governors.
# Important:
#   You *must* disable your distribution's governor settings or conflicts will
#   occur. ondemand is sufficient for *almost all* workloads, you should know
#   what you're doing!
#CPU_SCALING_GOVERNOR_ON_AC=powersave
CPU_SCALING_GOVERNOR_ON_BAT=ondemand


# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your CPU. For available frequencies see
# the output of tlp-stat -p.
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0


# Set Intel P-state performance: 0..100 (%)
# Limit the max/min P-state to control the power dissipation of the CPU.
# Values are stated as a percentage of the available performance.
# Requires an Intel Core i processor with intel_pstate driver.
#CPU_MIN_PERF_ON_AC=0
#CPU_MAX_PERF_ON_AC=100
#CPU_MIN_PERF_ON_BAT=0
#CPU_MAX_PERF_ON_BAT=30


# Set the CPU "turbo boost" feature: 0=disable, 1=allow
# Requires an Intel Core i processor.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
#CPU_BOOST_ON_AC=1
CPU_BOOST_ON_BAT=0


# Minimize number of used CPU cores/hyper-threads under light load conditions
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1


# Kernel NMI Watchdog:
#   0=disable (default, saves power), 1=enable (for kernel debugging only)
NMI_WATCHDOG=0


# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
# Frequency voltage pairs are written to:
#   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"


# Set CPU performance versus energy savings policy:
#   performance, normal, powersave
# Requires kernel module msr and x86_energy_perf_policy from linux-tools
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=powersave


# Hard disk devices; separate multiple devices with spaces (default: sda).
# Devices can be specified by disk ID also (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"


# Hard disk advanced power management level: 1..254, 255 (max saving, min, off)
# Levels 1..127 may spin down the disk; 255 allowable on most drives.
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the hardware default for the particular disk.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"


# Hard disk spin down timeout:
#   0:        spin down disabled
#   1..240:   timeouts from 5s to 20min (in units of 5s)
#   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# See 'man hdparm' for details.
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the hardware default for the particular disk.
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"


# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq);
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the kernel default scheduler for the particular disk.
#DISK_IOSCHED="cfq cfq"


# SATA aggressive link power management (ALPM):
#   min_power, medium_power, max_performance
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power


# Exclude SATA host devices from link power management.
# Separate multiple hosts with spaces.
#SATA_LINKPWR_BLACKLIST="host1"


# Runtime Power Management for AHCI controllers and disks:
#   on=disable, auto=enable
# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss
#AHCI_RUNTIME_PM_ON_AC=on
#AHCI_RUNTIME_PM_ON_BAT=on


# Seconds of inactivity before disk is suspended
AHCI_RUNTIME_PM_TIMEOUT=15


# PCI Express Active State Power Management (PCIe ASPM):
#   default, performance, powersave
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave


# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
# auto = mid on BAT, high on AC; default = use hardware defaults.
# (Kernel >= 2.6.35 only, open-source radeon driver explicitly)
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low


# Radeon dynamic power management method (DPM): battery, performance
# (Kernel >= 3.11 only, requires boot option radeon.dpm=1)
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery


# Radeon DPM performance level: auto, low, high; auto is recommended.
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto


# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
WIFI_PWR_ON_AC=off
WIFI_PWR_ON_BAT=on


# Disable wake on LAN: Y/N
WOL_DISABLE=Y


# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables, >=1 enables power save.
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1


# Disable controller too (HDA only): Y/N
SOUND_POWER_SAVE_CONTROLLER=Y


# Set to 1 to power off optical drive in UltraBay/MediaBay when running on
# battery. A value of 0 disables this feature (Default).
# Drive can be powered on again by releasing (and reinserting) the eject lever
# or by pressing the disc eject button on newer models.
# Note: an UltraBay/MediaBay hard disk is never powered off.
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0).
BAY_DEVICE="sr0"


# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=on


# Runtime PM for *all* PCI(e) bus devices, except blacklisted ones:
#   0=disable, 1=enable
RUNTIME_PM_ALL=1


# Exclude PCI(e) device adresses the following list from Runtime PM
# (separate with spaces). Use lspci to get the adresses (1st column).
#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"


# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM
# (should prevent accidential power on of hybrid graphics' discrete part).
# Default is "radeon nouveau"; use "" to disable the feature completely.
# Separate multiple drivers with spaces.
RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau"


# Set to 0 to disable, 1 to enable USB autosuspend feature.
USB_AUTOSUSPEND=1


# Exclude listed devices from USB autosuspend (separate with spaces).
# Use lsusb to get the ids.
# Note: input devices (usbhid) are excluded automatically (see below)
#USB_BLACKLIST="1111:2222 3333:4444"


# WWAN devices are excluded from USB autosuspend: 0=do not exclude / 1=exclude
USB_BLACKLIST_WWAN=1


# Include listed devices into USB autosuspend even if already excluded
# by the driver or WWAN blacklists above (separate with spaces).
# Use lsusb to get the ids.
#USB_WHITELIST="1111:2222 3333:4444"


# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
# (workaround for USB devices that cause shutdown problems).
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1


# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
# on system startup: 0=disable, 1=enable.
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
#   are ignored when this is enabled!
RESTORE_DEVICE_STATE_ON_STARTUP=0


# Radio devices to disable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"


# Radio devices to enable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"


# Radio devices to disable on shutdown: bluetooth, wifi, wwan
# (workaround for devices that are blocking shutdown).
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"


# Radio devices to enable on shutdown: bluetooth, wifi, wwan
# (to prevent other operating systems from missing radios).
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"


# Radio devices to enable on AC: bluetooth, wifi, wwan
#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"


# Radio devices to disable on battery: bluetooth, wifi, wwan
#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"


# Radio devices to disable on battery when not in use (not connected):
# bluetooth, wifi, wwan
#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"


# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
# required). Charging starts when the remaining capacity falls below the
# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
# Main / Internal battery (values in %)
#START_CHARGE_THRESH_BAT0=75
#STOP_CHARGE_THRESH_BAT0=80
# Ultrabay / Slice / Replaceable battery (values in %)
#START_CHARGE_THRESH_BAT1=75
#STOP_CHARGE_THRESH_BAT1=80


# ------------------------------------------------------------------------------
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth, wifi, wwan


# Hints:
# - Parameters are disabled by default, remove the leading # to enable them.
# - Separate multiple radio devices with spaces.


# Radio devices to disable on connect.
#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"


# Radio devices to enable on disconnect.
#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""


# Radio devices to enable/disable when docked.
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""


# Radio devices to enable/disable when undocked.
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""


Co ještě mohu udělat pro to, aby běhalo OK?
Název: Re:Asus Zenbook UX21E - zamrzá na baterii, xubuntu 16.04.1 x64, EFI instalace
Přispěvatel: JardaP . 29. 08. 2016, 12:42:40
Zkuste odinstalovat tlp. Pokud to problem yresi, muzete badat, co v tlp by mohlo problem zpusobovat.
Název: Re:Asus Zenbook UX21E - zamrzá na baterii, xubuntu 16.04.1 x64, EFI instalace
Přispěvatel: beer 29. 08. 2016, 15:07:09
V tlp problém není, je to problémový notebokook, který zamrzá při provozu na baterii, tlp ne nastaveno právě přesně dle návodu pro tenhle notebook. Bez něj to zamrzá taky, a zamrzá nejen Linux, ale i Windows 10, když tam byly.
Název: Re:Asus Zenbook UX21E - zamrzá na baterii, xubuntu 16.04.1 x64, EFI instalace
Přispěvatel: JardaP . 29. 08. 2016, 15:14:32
Aha, uzasne. A s jakymi Widlemi to puvodne bylo prodane?
Název: Re:Asus Zenbook UX21E - zamrzá na baterii, xubuntu 16.04.1 x64, EFI instalace
Přispěvatel: beer 29. 08. 2016, 20:58:09
7
Název: Re:Asus Zenbook UX21E - zamrzá na baterii, xubuntu 16.04.1 x64, EFI instalace
Přispěvatel: JardaP . 29. 08. 2016, 21:38:56
V logach ticho?
Název: Re:Asus Zenbook UX21E - zamrzá na baterii, xubuntu 16.04.1 x64, EFI instalace
Přispěvatel: beer 30. 08. 2016, 12:19:25
V logach ticho?
Do kterého logu mám mrknout? Tohle by měl být známý problém u těchto notebooků, doporučuje se vypnout notebook, rozebrat a odpojit baterii na 5 minut.
Citace
Finally, a reliable solution for unexpected shutdowns and hangs was discovered!

This seems to be working with any Asus laptop suffering from unexpected shutdowns and / or hangs while running on battery:

1. Add the following boot arguments _both_ to GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX in /etc/default/grub.cfg:

intel_pstate=disable pcie_aspm=force acpi_osi='Windows 2009' acpi_os_name='Windows 2009'

Don't forget to execute sudo update-grub afterwards!

2. Install the package tlp from ppa:linrunner/tlp an set at least the following values in /etc/default/tlp

CPU_SCALING_GOVERNOR_ON_BAT=ondemand

CPU_BOOST_ON_BAT=0

PCIE_ASPM_ON_BAT=powersave

RUNTIME_PM_ON_BAT=on

3. Shut down the device, carefully remove the bottom cover and detach the big battery (not the tiny CMOS battery) from the motherboard for five minutes. There are plenty of youtube videos showing how to safely disassemble the various Asus laptops. With certain power management settings on the OS side, the EC (Embedded Controller) goes crazy and thus needs resetting. The only way to reset it is to detach the battery for a few minutes.

4. From now on, shutdowns should be gone. Take care, however, not to _ever_ use any live USB stick or installation / recovery CDs based on Linux and using the intel_pstate driver and / or the default BIOS settings for ASPM. If you try to, you will merely reproduce the problem once again, and will subsequently have to disassemble your Zenbook once again. There are a few sad cases, like reinstalling Ubuntu itself, where you will _have_ to boot from a live USB utilizing the problematic intel_pstate driver. Only do so when running on AC, and please repeat Stage 3 (no matter how boring) of this manual once you are done.

P.S. Intel_pstate and the default ASPM bios settings eventually make the mobo's Embedded Controller go crazy and persist in this state until the battery is detached from the motherboard. That's basically how this problem is born.

Tomu se chci vyhnout, mám v živé paměti jak to dopadlo, když jsem u jednoho notebooku odpojil klávesnici, už jsem jí tam znova nedal, a když dal, tak už nefungovala :-(
Název: Re:Asus Zenbook UX21E - zamrzá na baterii, xubuntu 16.04.1 x64, EFI instalace
Přispěvatel: JardaP . 30. 08. 2016, 15:03:41
Do kterého logu mám mrknout?

/var/log/syslog a dalsi okolo. Tedy asi i kern.log, pm-*.log a co najdete zajimaveho. Mozna i X.org.0.log.