Fórum Root.cz
Hlavní témata => Hardware => Téma založeno: scientific 01. 07. 2021, 09:48:32
-
Omlouvám se, za špatné zatřídění topicu.
Ahoj,
mám tu problém a potřeboval bych názor, zda myslíte, že je k reklamaci jeden z disků nebo USB dock?
Připojí dock se 2 HDD přes USB do PC.
Všechno funguje jak má, jdu kopírovat soubory na ty disky.
Souborů je hodně, ale frčí to.
Avšak po pár hodinách kopírování se kopírování přeruší.
Disky v dokině úplně přestali komunikovat, ale v aplikaci "gnome disks" je vidím pořád, ale nekomunikují, nejde z nich číst, nejde je odmountovat, odpojit, spustit benchmark, nejde nic, píše to nějakou hlášku, případně můžu zjistit, ale trefnější hádám bude výstup z dmesg.
Setkal jste s s tím už někdo? Mám reklamovat dokinu asi že?
Děkuji moc.
dmesg:
[Thu Jul 1 08:55:34 2021] sd 11:0:0:0: [sdi] tag#10 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[Thu Jul 1 08:55:34 2021] sd 11:0:0:0: [sdi] tag#10 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 08:55:34 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 08:55:34 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 08:55:34 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 08:56:09 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 08:56:09 2021] sd 11:0:0:0: [sdi] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 08:56:09 2021] sd 11:0:0:0: [sdi] tag#2 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 08:56:09 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 08:56:09 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 08:56:23 2021] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[Thu Jul 1 08:56:44 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 08:56:44 2021] sd 11:0:0:0: [sdi] tag#3 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 08:56:44 2021] sd 11:0:0:0: [sdi] tag#3 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 08:56:44 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 08:56:44 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 08:57:20 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 08:57:20 2021] sd 11:0:0:0: [sdi] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 08:57:20 2021] sd 11:0:0:0: [sdi] tag#0 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 08:57:20 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 08:57:20 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 08:57:55 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 08:57:55 2021] sd 11:0:0:0: [sdi] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 08:57:55 2021] sd 11:0:0:0: [sdi] tag#1 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 08:57:55 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 08:57:55 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 08:58:30 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 08:58:30 2021] sd 11:0:0:0: [sdi] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 08:58:30 2021] sd 11:0:0:0: [sdi] tag#2 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 08:58:30 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 08:58:30 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 08:58:35 2021] sd 11:0:0:0: [sdi] tag#2 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_SENSE cmd_age=211s
[Thu Jul 1 08:58:35 2021] sd 11:0:0:0: [sdi] tag#2 Sense Key : Hardware Error [current]
[Thu Jul 1 08:58:35 2021] sd 11:0:0:0: [sdi] tag#2 Add. Sense: Internal target failure
[Thu Jul 1 08:58:35 2021] sd 11:0:0:0: [sdi] tag#2 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 08:58:35 2021] blk_update_request: I/O error, dev sdi, sector 209846527 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[Thu Jul 1 08:58:35 2021] EXT4-fs warning (device sdi1): dx_probe:748: inode #6553601: lblock 0: comm applicationerror -5 reading directory block
[Thu Jul 1 09:01:12 2021] sd 11:0:0:0: [sdi] tag#3 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[Thu Jul 1 09:01:12 2021] sd 11:0:0:0: [sdi] tag#3 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:01:12 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:01:12 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:01:12 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:01:47 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:01:47 2021] sd 11:0:0:0: [sdi] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:01:47 2021] sd 11:0:0:0: [sdi] tag#0 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:01:47 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:01:47 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:02:23 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:02:23 2021] sd 11:0:0:0: [sdi] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:02:23 2021] sd 11:0:0:0: [sdi] tag#1 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:02:23 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:02:23 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:02:58 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:02:58 2021] sd 11:0:0:0: [sdi] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:02:58 2021] sd 11:0:0:0: [sdi] tag#2 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:02:58 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:02:58 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:03:07 2021] usb 1-1.5: reset high-speed USB device number 5 using ehci-pci
[Thu Jul 1 09:03:33 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:03:33 2021] sd 11:0:0:0: [sdi] tag#5 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:03:33 2021] sd 11:0:0:0: [sdi] tag#5 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:03:33 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:03:33 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:04:09 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:04:09 2021] sd 11:0:0:0: [sdi] tag#6 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:04:09 2021] sd 11:0:0:0: [sdi] tag#6 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:04:09 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:04:09 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:04:14 2021] sd 11:0:0:0: [sdi] tag#6 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_SENSE cmd_age=211s
[Thu Jul 1 09:04:14 2021] sd 11:0:0:0: [sdi] tag#6 Sense Key : Hardware Error [current]
[Thu Jul 1 09:04:14 2021] sd 11:0:0:0: [sdi] tag#6 Add. Sense: Internal target failure
[Thu Jul 1 09:04:14 2021] sd 11:0:0:0: [sdi] tag#6 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:04:14 2021] blk_update_request: I/O error, dev sdi, sector 209846527 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[Thu Jul 1 09:04:14 2021] EXT4-fs warning (device sdi1): dx_probe:748: inode #6553601: lblock 0: comm applicationerror -5 reading directory block
[Thu Jul 1 09:06:53 2021] sd 11:0:0:0: [sdi] tag#3 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[Thu Jul 1 09:06:53 2021] sd 11:0:0:0: [sdi] tag#3 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:06:53 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:06:53 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:06:53 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:07:28 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:07:28 2021] sd 11:0:0:0: [sdi] tag#11 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:07:28 2021] sd 11:0:0:0: [sdi] tag#11 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:07:28 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:07:28 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:08:04 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:08:04 2021] sd 11:0:0:0: [sdi] tag#8 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:08:04 2021] sd 11:0:0:0: [sdi] tag#8 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:08:04 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:08:04 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:08:39 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:08:39 2021] sd 11:0:0:0: [sdi] tag#7 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:08:39 2021] sd 11:0:0:0: [sdi] tag#7 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:08:39 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:08:39 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:09:14 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:09:14 2021] sd 11:0:0:0: [sdi] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:09:14 2021] sd 11:0:0:0: [sdi] tag#0 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:09:14 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:09:14 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:09:50 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:09:50 2021] sd 11:0:0:0: [sdi] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:09:50 2021] sd 11:0:0:0: [sdi] tag#4 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:09:50 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:09:50 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:09:55 2021] sd 11:0:0:0: [sdi] tag#4 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_SENSE cmd_age=211s
[Thu Jul 1 09:09:55 2021] sd 11:0:0:0: [sdi] tag#4 Sense Key : Hardware Error [current]
[Thu Jul 1 09:09:55 2021] sd 11:0:0:0: [sdi] tag#4 Add. Sense: Internal target failure
[Thu Jul 1 09:09:55 2021] sd 11:0:0:0: [sdi] tag#4 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:09:55 2021] blk_update_request: I/O error, dev sdi, sector 209846527 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[Thu Jul 1 09:09:55 2021] EXT4-fs warning (device sdi1): dx_probe:748: inode #6553601: lblock 0: comm applicationerror -5 reading directory block
[Thu Jul 1 09:12:15 2021] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[Thu Jul 1 09:12:32 2021] sd 11:0:0:0: [sdi] tag#5 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[Thu Jul 1 09:12:32 2021] sd 11:0:0:0: [sdi] tag#5 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:12:32 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:12:33 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:12:33 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:13:08 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:13:08 2021] sd 11:0:0:0: [sdi] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:13:08 2021] sd 11:0:0:0: [sdi] tag#1 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:13:08 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:13:08 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:13:43 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:13:43 2021] sd 11:0:0:0: [sdi] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:13:43 2021] sd 11:0:0:0: [sdi] tag#2 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:13:43 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:13:43 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:14:18 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:14:18 2021] sd 11:0:0:0: [sdi] tag#9 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:14:18 2021] sd 11:0:0:0: [sdi] tag#9 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:14:18 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:14:19 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:14:54 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:14:54 2021] sd 11:0:0:0: [sdi] tag#3 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:14:54 2021] sd 11:0:0:0: [sdi] tag#3 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:14:54 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:14:54 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:15:54 2021] sd 11:0:0:0: [sdi] tag#10 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN
[Thu Jul 1 09:15:54 2021] sd 11:0:0:0: [sdi] tag#10 CDB: Read(10) 28 00 00 02 22 df 00 00 08 00
[Thu Jul 1 09:15:54 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:15:54 2021] sd 11:0:0:0: [sdi] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:15:54 2021] sd 11:0:0:0: [sdi] tag#0 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:15:54 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:15:54 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:15:59 2021] sd 11:0:0:0: [sdi] tag#0 FAILED Result: hostbyte=DID_RESET driverbyte=DRIVER_SENSE cmd_age=236s
[Thu Jul 1 09:15:59 2021] sd 11:0:0:0: [sdi] tag#0 Sense Key : Hardware Error [current]
[Thu Jul 1 09:15:59 2021] sd 11:0:0:0: [sdi] tag#0 Add. Sense: Internal target failure
[Thu Jul 1 09:15:59 2021] sd 11:0:0:0: [sdi] tag#0 CDB: Read(10) 28 00 0c 82 00 ff 00 00 08 00
[Thu Jul 1 09:15:59 2021] blk_update_request: I/O error, dev sdi, sector 209846527 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[Thu Jul 1 09:15:59 2021] EXT4-fs warning (device sdi1): dx_probe:748: inode #6553601: lblock 0: comm applicationerror -5 reading directory block
[Thu Jul 1 09:16:29 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:16:29 2021] sd 11:0:0:0: [sdi] tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:16:29 2021] sd 11:0:0:0: [sdi] tag#1 CDB: Read(10) 28 00 00 02 22 df 00 00 08 00
[Thu Jul 1 09:16:30 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:16:30 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:17:05 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:17:05 2021] sd 11:0:0:0: [sdi] tag#6 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:17:05 2021] sd 11:0:0:0: [sdi] tag#6 CDB: Read(10) 28 00 00 02 22 df 00 00 08 00
[Thu Jul 1 09:17:05 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:17:05 2021] scsi host11: uas_eh_device_reset_handler success
[Thu Jul 1 09:17:40 2021] scsi host11: uas_eh_device_reset_handler start
[Thu Jul 1 09:17:40 2021] sd 11:0:0:0: [sdi] tag#7 uas_zap_pending 0 uas-tag 1 inflight: CMD
[Thu Jul 1 09:17:40 2021] sd 11:0:0:0: [sdi] tag#7 CDB: Read(10) 28 00 00 02 22 df 00 00 08 00
[Thu Jul 1 09:17:40 2021] usb 4-4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[Thu Jul 1 09:17:40 2021] scsi host11: uas_eh_device_reset_handler success
-
Nevím, jestli dobře koukám, ale v logu vidím jen jedno zařízení (sdi). Komunikovat přestanou oba disky? Pro ten druhý se v logu nic neobjeví? Pokud máš tu možnost, zkus je připojit napřímo bez dokovací stanice a pusť na nich kopírování stejným způsobem.
-
Hromada USB-SATA prevodniku ma problem s UAS (spatny firmware), takze nejprve zkus hodit VID/PID tvoji krabicky na blacklist aby se pouzival jen mass-storage driver.
-
uz druhy dotaz a evidentne mas furt problem s gnome-disks.
tak se to nauc delat v prikazovem radku a uvidis, kde je problem.
-
Přináším další informace.
- Gnome disks vidí oba disky.
- Z lsblk nevidí ani jeden disk.
- df vidí jen jeden disk (/dev/sdi1). :-)
- To, že druhý disk není vůbec vidět může být chyba toho disku nebo chyba dokiny nebo co já vím čeho všeho. :-)
- Vlastně umím ověřit zda je to dokinou nebo diskem /dev/sdi, zkusím a dám vědět.
- Firmware dokiny asi ne, ještě donedávna to fungovalo a nějaký upgrady systému jsem nedělal.
- První dotaz s tímto nemá nic společného, v předchozím případě gnome disk nevidělo externě připojené disk kvůli totožnému USB identifikátoru. Namísto těch USB jsem vytáhl ve finále dokinu. Avšak v tomto případě takový problém není a gnome disk disky vidí. V tomto případě gnome disk funguje správně. Umím to dělat z příkazového řádku, ale když nefunguje spojení s disky, tak to napíše vždy jen něco jako filesystem is busy nebo read-only nebo to jen zasekne proces dokud nevytimeoutuje. gnome disk používá stejné komponenty, které vrací stejné hlášky ne? TAkže je podle mě jedno jestli to dělám přes gnome nebo přes CLI. Gnome disks je pouze GUI frontend ne? Je to jedno podle mě toto je slepá ulička nebo? Cílem je zajistit, aby disky fungovali správně, tím se automaticky vyřeší i správněé fungování gnome disks, tento problém nezpůsobuje gnome disks.
-
Jen takový blbý dotaz: Nemá ten cílový disk SMR?
-
ja to vidim na USB autosuspend. ries to v OS.
-
- První dotaz s tímto nemá nic společného, v předchozím případě gnome disk nevidělo externě připojené disk kvůli totožnému USB identifikátoru. Namísto těch USB jsem vytáhl ve finále dokinu. [...]
a kdyz si to uz nakousl, zkousel si ten postup co sem ti tam psal (https://forum.root.cz/index.php?topic=24935.msg353866#msg353866)? ;-)